With the 4-Play, you only need to connect one cable to the input of the pedal, and it provides you with four DI outputs to feed the PA system. Not only does this mean fewer cables on stage and less devices to keep track of, but it also eliminates the need to flag down the sound engineer when you need to switch instruments during a performance. The 4-Play puts you in control, while streamlining your setup on stage.
Many performing multi-instrumentalists will have each of their instruments feed a separate channel in the PA system, allowing for individual level, EQ, and effects settings. Typically this would require multiple DI boxes and instrument cables, creating a mess on stage that can be difficult to manage.
Radial 4-Play Features
- Quick changeovers for multi-instrumentalists
- Switch between four DI outputs using a single footswitch
- Shared tuner output & mute footswitch
- Ground lift switches to eliminate hum and buzz
- 4-Play Multi-Output Direct Box1
- Three Year Warranty (transferable)
- Audio circuit type Classic Class-A FET input with balanced audio grade opamp output
- Number of channels 4
- Frequency response 20Hz-20kHz
- Dynamic range 113dBu
- Gain 0dBu
- Clip Level +13dB
- Total harmonic distortion 0.03%
- Intermodulation Distortion 0.02%
- Phase Deviation -0.12° @ -20dBu / 1kHz
- Input Impedance 10MΩ
- Output Impedance 5.4KΩ
- Noise Floor -100dBu
- Maximum Input +8dBu
- Construction 14-gauge steel chassis & outer coat
- Size (LxWxD) 5x4.7x2"
- Weight 2lb
- Shipping size (LxWxD) 6.5x5.1x2.5"
- Shipping weight 2.4lb
- Power 9V Adaptor / 80mA center pin negative
- Conditions For use in dry locations only between 5°C and 40°C
