Need to connect a smartphone, tablet, or any playback device to a Dante network? How about an electric guitar, while still feeding an amp on stage? The DAN-TX can do it all. In fact, with signal handling of up to +24dB, you can connect the line level outputs of a mixing console to the DAN-TX without breaking a sweat. A local level control allows you to adjust as needed, and a number of input connector types ensures you won’t be digging around for an adaptor cable at a critical moment. No matter what source you’re using, the DAN-TX is the easiest way to get your analog audio onto a Dante network.
Radial DiNET DAN-TX 2 Features
- Stereo analog input device for Dante networks
- Connect instruments or line level sources
- 1/4", RCA and 3.5mm stereo TRS inputs
- 24bit/96kHz analog to digital conversion
- DiNET DAN-TX 2 channel Dante network transmitter1
- Audio Circuit Typehigh current balanced active input device
- Number of Channels2
- Sample Rate44.1kHz, 48kHz, 88.2kHz, and 96kHz
- Bit Depth24 bit
- Frequency Response20 Hz - 20,000 Hz
- Idle Channel Noise-108 dB
- Dynamic Range>103 dB
- Channel Separation>85 dB
- Max Input+28 dBu
- Equivalent Input Noise-98 dB
- THD+N0.008% @ -6 dBfs
- IMD0.0017% -10 dBfs
- Balanced Input Impedance40k Ω
- Unbalanced Input Impedance20k Ω
- Power Consumption1.25W
