The Radial Reamp Kit includes everything you need to Reamp in a single case. Start by recording with the industry standard Radial J48 direct box. This active DI is ideal for Reamping as it will not load down the pickups and will deliver the true sound of the instrument without distortion or artifact.
Then Reamp to your hearts content using the Radial X-Amp Reamper. This active Reamper has two buffered outputs for twice the fun! Run two amps at the same time, add pedals… try Reamping bass, drums and keys. Once you get started you will wonder how you ever recorded without it.
Radial Reamp Kit J48 & X-Amp Kit Features
- Combination J48 and X-Amp in convenient kit
- Use the J48 DI for recording the track
- Use the X-Amp to Reamp back to your amps
- Foam-filled full surround Zebracase included
- J48 MK2 Direct Box1
- X-Amp Studio Reamper1
- Three Year Warranty (transferable)1
- J48™ MK2 Specifications
- Type: Active 48V with switching supply
- Input impedance: Unbalanced 220K-Ohms
- Output impedance: Balanced 600-Ohms
- Frequency response: 20Hz ~ 20kHz
- Noise Floor -99dB
- Total harmonic distortion: 0.002% @ -5dBu
- Phase distortion: 1º @ 100Hz; 11º @ 20Hz
- Maximum input: +10dBu
- Size: 3.3x5x2" (84x127x48mm)
- Weight: 1.55 lb (720 g)
- Construction: Welded 14-gauge steel
- Finish: Baked enamel coat
- X-Amp Reamp Specifications
- Audio circuit type100% discrete class-A
- Frequency response
- 20Hz ~ 15kHz (± 1.0dB)
- Signal to noise ratio
- 88dB below instrument level (-20dBu)
- Dynamic range
- 119dB
- Noise floor
- OUT-1 -110dB; OUT-2 -108dBu
- Maximum input
- +22dBu
- Total harmonic distortion
- 0.02% @ -15dBu
- Inter-modulation distortion
- 0.02% @ -20dBu
- Input impedance
- 600Ω
- XLR input
- Balanced line-level, AES standard (pin-2 hot)
- Ground lift (input)
- Disconnects pin-1 at the XLR input
- Output level
- Adjustable
- Output type
- High-Z instrument-level, Out-1 direct, Out-2 transformer isolated
- Polarity
- 180º polarity reverse on Out-2
- Power
- +15VDC/400mA adapter included
- Construction
- 14 gauge steel chassis & outer shell, powder-coat finish
- Size
- 3.3x5x2” (84x127x48mm)
- Weight
- 1.55lb (720g)
- Shipping Size
- 5x2.75x10.75” (127x70x273mm)
- Shipping Weight
- 2.6lb (1.18kg)
- Conditions
- For use in dry locations only between 5°C and 40°C
