The Voco-Loco is a foot-controlled microphone preamp and effects loop switcher that enables a vocalist or acoustic instrumentalist to incorporate guitar effects pedals into their signal path.
The Voco-Loco combines a microphone preamp with a guitar pedal effects loop, allowing a lead vocalist, sax or trumpet player to add guitar pedals to their audio signal path just like an electric guitarist adds effects for soloing. Simply plug your mic into the Voco-Loco via the XLR input, connect your effects pedals using standard 1/4" guitar cables, and then send the output from the Voco-Loco to the input on your mixer. Now with the touch of a footswitch you can add your favorite delay, reverb, distortion or wah-wah to any mic'd up instrument or vocal - the options are only limited by your imagination.
Radial Voco-Loco Features
- Add guitar effects pedals to vocals or instruments
- Create exciting and unique effects as you perform
- Turn on multiple effects using one footswitch
- Works with either dynamic or condenser microphones
- Voco-Loco mic preamp & effects loop pedal1
- Audio Circuit Typeintegrated Op-Amp with Class-A FET input
- Frequency Response20Hz - 20kHz
- THD<0.005%
- Dynamic Range100dB
- Input Impedance10KΩ
- Max. Input+10dB
- Gain52dB
- Clip Level Output+15dBu
- Output Impedance300Ω
- Equivalent Input Noise-120dBu
- Noise Floor-85dBu
- Intermodulation Distortion<0.005%
- Phase Deviation8° @ 50Hz
- Common Mode Rejection-73dB @ 55Hz
- FX Loop Input Impedance100K
- FX Loop Output Impedance3000Ω
- OutputPin 1 ground, Pin 2 (+), Pin 3 (-)
- Power15VDC / 400 mA
- XLR Configuration (follows AES spec) pin-1 ground, pin-2 (+), pin-3 (-)
