The SVT-7PRO pumps out a ferocious kilowatt of pure Ampeg tone in a compact design that weighs in at just 15lbs. The SVT-7PRO features the same professional features as the other PRO Series heads including a flexible 5-position mid tone control, remote switching FX loop and a sleek onboard variable compressor. The tube preamp boasts a premium JJ 12AX7 that feeds the weight-defying Class-D power section. Sure it’s portable and yes, it’s small…but it can power everything from a small single PN-115HLF up to a monster Heritage SVT-810E. And at 80 cents a watt, the value is undeniable.
Ampeg SVT-7PRO Features
- Single 12AX7A vacuum tube preamp
- Mute switch
- Selectable -15 dB Input Pad
- Dual-function Mute and Peak LED
- On-board optical Compressor
- Gain control
- Ultra Lo and Ultra Hi switches
- Bass, Mid, and Treble controls
- 5-way Midrange Frequency control
- FX Mix control
- Master Volume control
- Headphone output
- Effects Loop with separate Send and Return jacks
- Tuner Output
- XLR Tube Direct Output
- Preamp Out and Power Amp In jacks
- Footswitch jack
- Stereo RCA Auxiliary Input
- Two Speakon® - 1/4" combo Speaker Output jacks
- Lightweight, fan-cooled Switching Power Supply
- Class-D power amplifier rated at 1000 Watts RMS into 4Ω
- SVT-7PRO 1000W Tube Rackmount Bass Head1
- Removable rack ears2
- Output Power Rating
- 600 Watts RMS @ 8 Ω, 5% THD
- 1000 Watts RMS @ 4 Ω, 5% THD
- Signal to Noise Ratio72 dB (20 Hz–20 kHz, unweighted)
- Maximum Gain 72 dB, tone controls centered
- Tone Controls
- Bass: +12/–12 dB @ 40 Hz
- Midrange: +10/–20 dB @ 220 Hz, 450 Hz, 800 Hz, 1.6 kHz, or 3 kHz
- Treble: +15/–20 dB @ 4 kHz
- Power Requirements
- ~100–120V AC, 50–60 Hz, 1050W
- ~20–240V AC, 50–60 Hz, 1050W
- Dimensions with feet (HxWxD) 4x15.6x11.5" (102x396x292 mm)
- Approximate Weight 15.5 lbs (7.03 kg)