![Bag End PD18E-AD Subwoofer System](https://cdn11.bigcommerce.com/s-mmffu4sg6a/images/stencil/50x50/products/6041/47307/89597__33790.1656708071.jpg?c=1")
The D18E-AD is a very high output INFRA subwoofer system designed to provide high fidelity extended low frequency audio reproduction from a relatively small and low-profile enclosure. The D18E-AD provides perfectly flat response down to 8 Hertz when used in conjunction with the 8 Hertz Infra Integrator. Designed for permanent installation, the D18E-AD offers a total height of 15" enabling it to fit under platforms and in tight vertical spaces. Standard features include a durable flat black painted finish and a black coated steel grille.
Bag End PD18E-AD Features
- House of Worship
- 5.1 Digital Format Subwoofer
- Recording Studio
- PA System Installations
- Home Theater
- Discotheque
- PD18E-AD Subwoofer System1
- System Type2 - Infrasub™ sealed chambers 3 ft3 each
- Enclosure18mm 13-ply birch plywood
- FinishBlack Ro Tex™ true water born environmental finish
- Grille16 Gauge black powder coated perforated steel
- Low Frequency Components2 - EL-18A 18” Extended transducers, Infra™ cone, 3” Voice coil, 120 oz Magnet
- Input ConnectorXLR 1/4” combo with XLR loop through
- Internal AmplificationMinima One™
- Input Impedance48K ohms
- Input CAL Sensitivity+4 dBu
- Maximum Continuous Amplifier Power1350 W
- High Pass Filter Switchable: -6 dB @ 8 Hz; @ 50 Hz; @ 95 Hz
- Overload ProtectionInternal Dynamic Filter™ protection
- LED Indicators
- Green - On
- Yellow - Dynamic Filter™ threshold
- Red - System fault or sleep mode
- Mains Voltage Requirements
- Auto sensing
- Universal voltage range
- 88 V minimum to 270 V maximum
- Mains Current Requirements
- 4.6 A @ 120V
- 2.3 A @ 240V
- HardwareOptional F8 fly points available
- Fly Points Safe Working Load200 lbs
- Crossover TypeRequires external Infra™ integrator
- Frequency Response
- 60 Hz to 250 Hz ±3 dB
- 8 Hz to 95 Hz ±3 dB with external Infra™ integrator
- Low Frequency Limit8 Hz
- Maximum Calculated Continuous Acoustic Output
- Half Space @ 1 Meter
- 10 Hz - 96 dBSPL
- 20 Hz - 108 dBSPL
- 40 Hz - 124 dBSPL
- 80 Hz - 130 dBSPL
- PolarityA positive asymmetrical signal applied to pin 2 will result in a positive asymmetrical acoustical pressure
- Dimensions (HxWxD)15x38x30” (39x97x77 cm)
- Weight131 lbs (58 kg)
- Custom FinishesOptional custom finishes include white or unfinished ready to paint
