The TASCAM IF-AN16 / OUT is an analog output interface card for the DA-6400 / DA-6400dp digital multi-track recorders. Equipped with 16 analog output channels and 32-channel recording is available by using two IF-AN16 / OUT cards.
TASCAM IF-AN16/OUT Features
- Use as a multi-channel output source for playback in theaters
- For multi-channel playback in amusement parks
- IF-AN16/OUT Analog Output Interface Card1
- Owner's manual (with warranty)1
- Format
- Sampling frequency: 44.1k/48k/88.2k/96k Hz
- Bit length: 16-bit/24-bit
- Analog output 1-8/9-16
- Connector: D-Sub 25-pin
- Locking screws: No.4-40 UNC (inch type)
- No. of output channels: 16
- Nominal output level / maximum output level
- +4dBu/+24dBu
- +4dBu/+22dBu
- +4dBu/+20dBu
- +4dBu/+18dBu
- +6dBu/+15dBuM
- Output impedance: 200Ω
- Output attenuation: 0 <> -14dB (0.5dB steps)
- Applicable load impedance: 2kΩ or more
- Dimensions (WxHxD)107×40×161.5mm
- Weight240g
- Audio performance
- Frequency response
- +0.1dB/-0.5dB：20Hz/20kHz（−16dBFS input, Fs=44.1k/48kHz, JEITA）
- +0.1dB/-1.0dB：20Hz/40kHz（−16dBFS input, Fs=88.2k/96kHz, JEITA
- THD: 0.001% or less (0dBFS input, 1kHz, Fs=44.1k/48k/88.2k/96kHz, JEITA)
- S/N ratio: 110dB or more (Fs=44.1k/48k/88.2k/96kHz, JEITA)
- Dynamic range: 110dB or more (Fs=44.1k/48k/88.2k/96kHz, JEITA)
- Crosstalk: 110dB or more (1kHz, Fs=44.1k/48k/88.2k/96kHz, JEITA)
- Frequency response
