
- Bluetooth Version5.0
- Low Frequency Transducer4.5"
- High Frequency Transducer0.75" soft dome
- Crossover1725 Hz, 1st order
- Power Amp60 W (30 W each speaker), Class D
- Sensitivity87 dB SPL @ 1 m with -10 dBV Aux In (Volume = Max)
- Max. Continuous SPL89 dB
- System Peak SPL102 dB (pink noise, 12 dB crest factor)
- Max. SPL Momentary Peak104 dB
- Max. Peak Input Level (-10dBV / +4dBu)+6 dBV / +20.3 dBu
- Frequency Range (-3dB SPL)88 Hz – 20 kHz
- Frequency Range (-10dB SPL)60 Hz – 20 kHz
- System Rated Impedance8 Ω
- Minimum Impedance7.8 Ω @ 260Hz
- Cabinet Tuning Frequency72 Hz
- System Distortion Criteria<10% THD at maximum output with full compressor / limiter engagement
- Electrical Distortion Criteria<0.2%THD @ 1 kHz, 2.83 VRMS output; <1% THD @ 1 kHz, full rated output
- Signal to Noise Ratio75 dBA (A-Weighted), 70 dBr (unweighted), relative to 2.83 VRMS output on HF
- Coverage (HxV)120° x 60°
- Audio Output, System Output Type1/8" stereo headphone with auto speaker mute
- Audio Input
- System Input Type: Bluetooth, 1/8" Aux, RCA, 1/4" TRS balanced
- Input Selection Options: Bluetooth, Aux, RCA, TRS, All
- Powering Interface
- System Power Handling: 30 W x 2 @ 100 hours, IEC/SMS
- System Polarity: EIA
- AC Input Voltage: 100 – 240 VAC (± 10%), 50/60 Hz
- Current Draw: 85 watts
- Electrical Current Draw (W) Idle 100 / 240 VAC: 3.52 / 3.7
- Electrical Current Draw (W) Max Power 100 / 240 VAC: 80 / 80
- Electrical Current Draw (W) Low Power Standby Mode 100 / 240 VAC: 0.34 / 0.46
- Design
- Enclosure Type: ported
- Enclosure Material: ABS with metal grille
- Enclosure Finish: matte acrylic paint
- Construction
- Dimensions (HxWxD): 9.72" x 6.02" x 4.88"
- Primary Monitor Weight: 4.54 pounds
- Secondary Monitor Weight: 3.81 pounds
Why Choose SoundPro?
Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.