![K-Array Kommander-KA84 4x2000W Power Amplifier](https://cdn11.bigcommerce.com/s-mmffu4sg6a/images/stencil/50x50/products/21621/42204/73288a__60839.1640274088.jpg?c=1")
The Kommander-KA84 is a 4-channel per 2000W on 4Ω. It has 4 fully-independent and configurable channels: 4 analog IN and 2 AES-EBU IN to 4 OUT. The KA84 can be used as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories.
K-Array Kommander-KA84 Features
- Lightweight
- Integrated DSP
- Dante Compatible
- Onboard Touch Screen
- Kommander-KA84 4x2000W Power Amplifier1
- Type4ch switching mode, Class D Amplifier
- Output Power (1)4x 2000 W @ 4 Ω
- Impedanceminimum 4 Ω
- Frequency Response20 Hz – 20 kHz (±1 dB)
- Connections
- 4x XLR (bal) Mic/Line input
- 4x XLR (bal) parallel line output
- XLR AES3 input & output
- KA-POT1 remote volume control inlet
- 2x NL4 speakOn loudspeaker output
- USB-B / RS485 for remote control
- ControlK-Framework software via USB or RS485
- Digital Signal Processor
- Built-in DSP
- Input gain, routing matrix, delay up to 330 ms
- 3x input ch. + 6x output ch. full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth)
- Onboard preset, Remote monitoring
- Built-in DSP
- Power Handling
- MAINS Operating Range: 100-240V AC, 50-60 Hz with PFC
- Power Consumption: 600 W @ 4 Ω load, Pink noise, 1/8 rated power
- Protections: Primary AC mains overcurrent/overvoltage, thermal protection, output short circuit, RMS output current protection, high frequency protection, power limiter, clip limiter.
- Dimensions (W x H x D) (2)17 x 3.5 x 12 in (430 x 89 x 305 mm)
- Weight14.1 lbs (6.4 kg)
- MaterialStainless Steel
- ColorBlack
- IP RatingIP20
- Notes for data
- (1) EIAJ 8/32 burst test standard
- (2) Removable rubber feet and rack mounting brackets excluded
