
- Acoustic Performance
- Frequency Response (-3dB): 45Hz-20kHz
- Frequency Response (-10dB): 38Hz-20kHz
- SPL @ 1 meter, +/-4 dBu into Balanced Input: 105dB SPL @ 1m
- Maximum SPL Per Pair: 111 dB SPL @ 1m
- Transducers
- Low Frequency: 6.5"/165mm polypropylene woofer
- High Frequency: Neodymium magnet driven 1"/25mm silk dome tweeter
- Amplifiers
- Low Frequency Power: 40W, 4 Ohm load, 80W peak
- High Frequency Power: 25W, 6 Ohm load, 50W peak
- Type: Monolithic IC, Class AB with DMOS power stage
- Electronic Crossover
- Crossover Type: 24dB/octave
- Crossover Frequency: 3kHz
- Sensitivity: +4 dBu at 300 Hz for full output
- Input Impedance: 20 kOhm, balanced bridging; 10kOhm unbalanced
- EqualizationHigh Frequency EQ: +/-2dB @ 3kHz and above
- AC Power Requirements
- Power Requirements
- ~120V, 60Hz
- ~220V - 240V, 50/60Hz
- ~100V, 50/60Hz
- Note: MR Monitors do not support multiple voltage configurations. Make sure the voltage rating for your particular model (as indicated on the rear panel near the IEC socket) corresponds with your local AC mains voltage
- AC Connector: 3-pin IEC 250 VAC, 15A male
- Fuse
- 115 VAC: T 1.6 AL/250V
- 230 VAC: T 800 mAL/250V
- Power Consumption: 120W with music, loud mix; 11W quiescent (idle)
- Power Requirements
- Physical Dimensions and Weight
- Enclosure: 0.47"/12mm thick MDF with 0.94"/24mm MDF front panel
- Dimensions (HxWxD): 12.9x8.3x11.2" (328x210x284mm)
- Weight: 16.5 lbs (7.5kg)
Why Choose SoundPro?
Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.