Skip to main content
Panasonic PT-MZ16KL 16,000 Lumen Laser Projector
Panasonic PT-MZ16KL 16,000 Lumen Laser Projector

Panasonic PT-MZ16KL 16,000 Lumen Laser Projector

SoundPro Item: 50950
MPN: PT-MZ16KLWU
No Longer Available for Purchase

Add to Wish List

Contact an Account Manager for your personalized price

Note: Lens sold separately.

The PT-MZ16K features a dedicated and original sealed cooling system for the phosphor wheel, which is made of durable, heat-resistant inorganic material. Extensive shielding around the phosphor-wheel assembly protects against dust-particle intrusion for extended reliability and consistent brightness.

Multi-Drive Laser Optical Engine groups laser diodes into multiple laser modules. If one diode in a module fails, only a limited number of diodes in the affected series are bypassed. The remaining diodes continue to operate, maintaining close to full brightness. If a laser diode fails in other projectors, the entire module shuts down, resulting in a dramatic loss of brightness. This projector adds an invaluable layer of insurance when image presentation must not be interrupted.

Panasonic PT-MZ16KL Features

  • Lens sold separately
  • Supports 4K Signal Input
  • First LCD Projectors to Support Geometry Manager Pro Software
  • Geometric Adjustment with Free Grid Correction via Remote Control
  • Quiet Operation for Distraction-free Viewing
  • Detail Clarity Processor 4 Provides Pin-Sharp Insight
  • Color Adjustment Function
  • PT-MZ16KL 16,000 lumen laser projector1
  • Remote control unit1
  • Power cord1
  • AAA battery (for remote)2
  • Lens fixing screw4
  • LCD Panel, Number of Pixels2,304,000 ( Pixels 1920 x 1200) pixels x 3
  • Light Sourcelaser diodes
  • Light Output *116,000 lumens
  • Time Until Light Output Declines to 50% *220,000 hours (normal)
  • Resolution1920 x 1200 pixels
  • Lens Shift
    • Vertical (from center of screen): ±60 % (±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered)
    • Horizontal (from center of screen): ±20 % (±19 % with ET-EMW200) (powered)
  • Keystone Correction Range
    • Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500)
    • Horizontal: ±15° (±8° with ET-EMW200/ET-EMW300)
  • InstallationCeiling/floor, front/rear, free 360-degree installation
  • Terminals
    • SDI IN: BNC x 1: 3G/HD-SDI input
    • HDMI IN: HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*3)
    • DVI-D IN: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
    • REMOTE 2 IN: M3 x 1 for wired remote control
    • LAN: RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
    • REMOTE 1 IN: D-sub 9-pin (female) × 1 for external control (parallel)
    • RGB IN: D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
    • DC OUT: USB Connector (Type A) x 1 (Output 5 V/2 A)
    • DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.2, Deep Color, 4K/60p signal input*3)
    • SERIAL/MULTI PROJECTOR SYNC IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
    • SERIAL/MULTI PROJECTOR SYNC OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
    • REMOTE 2 OUT: M3 x 1 for link control (for wired remote control)
  • Power SupplyAC 100-240 V, 50/60 Hz
  • Power Consumption1050W
  • Cabinet Materialsmolded plastic
  • Operation Noise *138 dB (NORMAL) / 32 dB (Quiet)
  • Contrast Ratio *13,000,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3]
  • Center-to-Corner Zone Ratio *185%
  • FilterIncluded (Estimated maintenance time: approx. 20,000 hours)
  • Panel Size25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
  • Screen Size (diagonal)2.03–12.7 m (80–500 in), 16:10 aspect ratio
  • Applicable SoftwareLogo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit),Smart Projector Control for iOS/Android™
  • Operating EnvironmentOperating temperature: 0–45 °C (32–113 °F)*6; Operating humidity: 10–80 % (no condensation)
  • Weight *5approx. 49.2 pounds
  • Dimensions (WxHxD) *425.4" x 8.4" x 17.3"
  • Note
    • *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped
    • *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [2], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3of particulate matter. Estimated time until light output declines to 50 % varies depending on environment
    • *3 4K signals are converted to theprojector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®
    • *4 With legs at shortest position
    • *5 Average value. May differ depending on the actual unit
    • *6 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level,and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector

In The Box

Customer Reviews