Panasonic PT-RZ21KU 21,000 Lumen SOLID SHINE Laser Projector

Panasonic’s groundbreaking PT-RZ21K Series 3-Chip DLP™ SOLID SHINE Laser projector combines flagship picture quality produced by the PT-DZ21K/DZ21K2 Series projector—current leader in multi-screen events staging—with the compact size and incredible durability of our mid-range PT-RZ970 Series laser projector. The PT-RZ21K Series is the world’s first 20,000 lm laser projector^*3 to feature a filterless^*2 cooling system and shielded optical unit, delivering unassailable reliability in dusty conditions. Handling is effortless with just two technicians. With 20,000-hour maintenance-free^*4 operation and software for expedited multi-screen mapping calibration, the rugged yet lightweight PT-RZ21K Series delivers class-beating color reproduction with dramatically reduced running costs, making it the new first choice for event professionals.

Panasonic PT-RZ21KU Features

• Laser 3-chip DLP, 21,000 lumens (center), WUXGA
• Lamp-free laser projection with dust resistant liquid cooling system for 20,000 hours maintenance free operation
• Real maintenance-free projection with filter-less design and no need for smoke-filter
• Un-interrupted projection with dual-light source and built in redundancy inputs
• Geometric Manager Pro, color matching and edge blending

• PT-RZ21KU 21,000 Lumen SOLID SHINE Laser Projector1

• TechnologyLaser 3-chip DLP
• Power supply
  • AC 200V-240V, 7.7A, 50/60Hz
  • The light output will decrease to approximately 1/2 when using the projector with AC 100V to AC 120V [9.6A]
• Power consumption
  • 1,510 W (1,525 VA [AC200V]) (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal)
  • 1,217W (Normal Mode), 972 W (Eco Mode)
  • Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297ft), IEC627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast [2]
• BTU value Max 5,159 BTU
• DLP™ chip | Panel size 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
• DLP™ chip | Display method DLP™ chip x 3, DLP™ projection system
• DLP™ chip | Pixels 6,912,000 (1920 x 1200 x 3) pixels
• Refresh Rate 120 Hz*2
• LENS Optional (no lens included with this model), powered zoom, powered focus lens
• Light source Laser Diode (Laser class: Class 1)*Class 3R for North America
• Illumination life of set
  • Varies depending on operation mode setting.
  • 20,000 hours at half luminance (Normal) 24,000 hours at half luminance (Eco)
  • * IEC62087: 2008 Broadcast contents, Dynamic contrast [3]
  • (NORMAL/ECO Temperature: 30°C (86°F), Altitude 700m (2,297 ft),Dynamic
  • Contrast [3] Under conditions of 0.15 mg/m3 of particulate matter
• Screen Size (Diagonal)
  • 1.78-25.4 m (70-1,000 in) with 16:10 aspect ratio
  • 1.78-15.24 m (70-600 in) with the ET-D75LE8, 16:10 aspect ratio
  • 3.05-15.24 m (120-600 in) with the ET-D75LE95, 16:10 aspect ratio
• Brightness 21,000 lm (Center)*3*5 / 20,000 lm (Normal)*4*5
• Center-to-corner uniformity 90%
• Contrast*3 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
• Resolution WUXGA (1920 x 1200 pixels)
• Scanning frequency | Video/Y/C fH:15.73KHz fV:59.94Hz, fH:15.63KHz fV:50Hz
• Scanning frequency | RGB
  • Resolution: 640 x 400 pixels to 1920 x 1200 pixels
  • Dot clock frequency: 162MHz or less
  • PIAS (Panasonic Intelligent Auto Scanning)
• Scanning frequency | YPBPR(YCBCR)
  • Resolution: 480i/576i to 1920 x 1080 pixels
  • Dot clock frequency: 148.5MHz or less
  • The SYNC/HD and VD terminals do not support 3 value SYNC
• Scanning frequency | DVI
  • Moving image signal resolution: 480i*6/576i*6 to 1920x1080
  • Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
  • Dot clock frequency: 25 MHz to 162 MHz
• Scanning frequency | HDMI/DIGITAL LINK
  • Moving image signal resolution: 480i*6/576i*6 to 1920x1080
  • Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
  • Dot clock frequency: 25 MHz to 162 MHz
• Scanning frequency | SDI
  • SD-SDI signal
  • HD-SDI signal
  • 3G-SDI signal
• Optical axis shift
  • Vertical (from center of screen) ±55 % (±44 % with ET-D75LE6, +68 % - +78 % with ET-D75LE95) (powered) vHorizontal (from center of screen) ±20 % (±15 % with ET-D75LE6, ±12 % with ET-D75LE95) (powered)
  • NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. Installation Ceiling/floor, front /rear, free 360-degree installation
• Terminals | RGB 1 IN BNC x 5
• Terminals | RGB 1 IN | R, G, B
  • R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms
  • HD, VD/SYNC: TTL, high impedance, positive/negative automatic
• Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
• Terminals | RGB 1 IN | Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
• Terminals | RGB 1 IN | Video in BNC x 1, 1.0 Vp-p, 75 ohms
• Terminals | RGB 2 IN D-sub HD 15-pin (female) x 1
• Terminals | RGB 2 IN | R, G, B
  • R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms
  • HD, VD/SYNC: TTL, high impedance, positive/negative automatic
• Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
• Terminals | DVI-D IN
  • DVI-D 24-pin x1
  • Single link, DVI 1.0 compliant, HDCP compatible
• Terminals | HDMI IN
  • HDMI 19-pin x1
  • HDCP compatible, Deep Color compatible
• Terminals | SDI IN 1
  • BNC x 1
  • SD-SDI signal SMPTE ST 259 compliant
  • HD-SDI signal SMPTE ST 292 compliant
  • 3G-SDI signal SMPTE ST 424, 425-2 compliant
  • Dual link HD-SDI (LINK A) signal SMPTE ST 372 compliant
  • Dual link 3G-SDI (Link 1) signal SMPTE ST 425-3 compliant
• Terminals | SDI IN 2
  • BNC x 1
  • SD-SDI signal SMPTE ST 259 compliant
  • HD-SDI signal SMPTE ST 292 compliant
  • 3G-SDI signal SMPTE ST 424, 425-2 compliant
  • Dual link HD-SDI (LINK B) signal SMPTE ST 372 compliant
  • Dual link 3G-SDI (Link 2) signal SMPTE ST 425-3 compliant
• Terminals | DIGITAL LINK
  • RJ-45
  • HDBaseT™ compliant, HDCP compatible, Deep Color compatible
• Terminals | 3D Sync 1 In/Out / Multi Projector Sync In BNC x 1, IN : TTL Hi-z OUT : TTL max10mA
• Terminals | 3D Sync 2 Out/Multi Projector Sync Out BNC x 1, TTL max10mA
• Terminals | SERIAL IN D-sub 9-pin x 1 for external control (RS-232C compliant)
• Terminals | SERIAL OUT D-sub 9-pin x 1 for link control
• Terminals | Remoter 1 In M3 jack x 1 for wired remote control
• Terminals | Remoter 1 Out M3 jack x 1 for link control
• Terminals | Remoter 2 In D-sub 9-pin x 1 for external control (parallel)
• Terminals | DIGITAL LINK/LAN
  • RJ-45 x 1 for network connection, 100Base-TX
  • PJLink™ (class 2) compatible, Art-Net compatible
• Terminals | DC OUT 5V USB connector (type A) x 2 for power supply only (DC 5V, Max 2A)
• Power cord length3 m(9 ft 10 in)
• Cabinet materials Molded plastic
• Dimensions (WxHxD) 598x270x725 mm (23 17/32x10 5/8x28 17/32"), not including protruding parts
• Weight *9 Approximately 49kg (108 lbs) (not including lens)
• Operation noise *3 46dB
• Operating environment Operating temperature: 0-50 °C (32-122 °F)*10; Operating humidity: 10-80 % (no condensation)
• Notes
  • *1 When Standby Mode is set to ECO, network functions such as power on over LAN will not operate. Additionally, only certain c ommands can be received for external control using the serial terminal.
  • *2 Refresh rate varies depending on scanning frequency.
  • *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
  • *4 The value of the light output at the center region of the projected image is extracted based on the light output measurement method de・ed by the ISO/IEC 21118:2012 international standards.
  • *5 In AC200V, When using a projection lens other than ET-D75LE95.
  • *6 Pixel-Repetition signal(dot clock frequency 27.0MHz) only
  • *7 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from t he screen.
  • *8 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55 °.
  • *9 Average value. May differ depending on the actual unit
  • *10 Operating temperature is 0–45 °C (32–113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,779 ft) above sea level.
  • When the [PROJECTOR SETUP] menu -> [OPERATION SETTING] -> [OPERATING MODE] is set to [NORMAL], and the operating environmen temperature exceeds the following value, the light output may be reduced to protect the projector.
  • When using the projector at an altitude lower than 2,700m (8,858') above sea level: 35°C (95°F)
  • When using the projector at an altitude between 2,700m (8,858') and 4,200m (13,780') above sea level: 25°C (77°F)