null Skip to main content
Peavey IPR 2 2000 2-Channel Power Amplifier
Peavey IPR2 2000 2-Channel Power Amplifier
$499.99

Peavey IPR2 2000 2-Channel Power Amplifier

(No reviews yet)
SoundPro Item: 16931
MPN: IPR 2 2000
MSRP: $799.99
$499.99
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

Peavey's IPR2 power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

Peavey IPR2 2000 Features

  • 2- Channel independent fourth-order Linkwitz-Riley crossovers
  • DDT
  • Revolutionary IPR class D topology
  • Detented input controls
  • Speakon output connectors
  • Lightweight
  • LED illuminated
  • Combi XLR 1/4" inputs
  • Individual signal pass 1/4" jacks on each channel
  • IPR 2 2000 2-channel power amplifier1
  • Rated Watts 2ch x 2 ohms1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
  • Rated Watts 2ch x 4 ohms600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
  • Rated Watts 2ch x 8 ohms370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
  • Minimum Load Impedance2 ohms
  • Maximum RMS Voltage Swing55volts
  • Frequency Response10Hz - 30kHz, +/- 3 dB at 1 watt, eight ohms.
  • 20Hz - 20kHz 2ch x 2 ohms<0.25% @ 650 watts 20Hz to 4kHz, decreasing to 530 watts @ 20kHz, both channels driven.
  • 20Hz - 20kHz 2ch x 4 ohms<0.15% @ 470 watts 20Hz to 10kHz, both channels driven.
  • 20Hz - 20kHz 2ch x 8 ohms<0.15% @ 260 watts 20Hz to 10kHz, both channels driven.
  • Input CMRR> - 69 dB @ 1 kHz.
  • Voltage Gainx 60 (+35 dB)
  • Crossover100Hz switchable 2nd order high pass and 3rd low pass per channel.
  • Crosstalk> -70dB @ 1kHz @ 250 watts power @ 8 ohms.
  • Hum and Noise> -105 dB, “A” weighted referenced to rated power @ 4 ohms.
  • Slew Rate> 12V/μs
  • Damping Factor (8 ohms)> 170:1 @ 20Hz - 1kHz @ 8 ohms.
  • Input Sensitivity.775 volts +/- 3% for 1kHz 4 ohm rated power, .68 volts +/- 3% for 1kHz 2 ohm rated power.
  • Input Impedance15k ohms, balanced and 7.5k ohms unbalanced.
  • Current Draw @ 1/8 power in VA (watts)540 (315) @ 2 ohms, 370 (185) @ 4 ohms, 240 (115) @ 8 ohms.
  • Current Draw @ 1/3 power in VA (watts)1250 (760) @ 2 ohms, 750 (425) @ 4 ohms, 460 (240) @ 8 ohms.
  • Idle Consumption90VA, 40watts.
  • CoolingTemperature dependent variable speed 80 mm DC fan.
  • Controls2 front panel attenuators, crossover select switch for HPF, Normal and LPF
  • Indicator LEDsFive LED indicators per channel: Active, Signal, DDT™, Temperature and DC
  • ProtectionThermal, DC, subsonic, incorrect loads, under and over voltage.
  • ConnectorsInputs: Dual Combination 1/4” & XLR, Outputs: Dual 1/4” signal patch, dual twist lock connectors.
  • Construction0.062” thick aluminum
  • Dimensions3.5”x19”x 10.5” behind front panel + 0.6” for handle
  • Net Weight3.23 kg (7.12 lbs.*)
  • Gross Weight4.31 kg (9.5 lbs.)

In The Box

Customer Reviews