![Peavey PV 5300 All-In-One Powered Mixer](https://cdn11.bigcommerce.com/s-mmffu4sg6a/images/stencil/50x50/products/18143/36484/99921__51692.1625850169.jpg?c=1")
The Peavey PV 5300 is an all-in-one powered mixer, providing up to four combination XLR and 1/4" inputs using premium Peavey mic preamps, and 200 watts of peak power for crystal clear audio reproduction. The Peavey PV 5300 uses exclusive features to accurately help improve tone and clarity of vocals. Peavey's revolutionary FLS Feedback Locating System quickly and easily identifies and removes feedback. Footswitchable, built-in reverb complements the already feature-packed unit. Connect almost anything to this versatile mixer via the onboard 1/4", RCA and 1/8" mini jacks.
Peavey PV 5300 Features
- FLS® Feedback Locating System
- Combination XLR and 1/4" input jack
- 5-band graphic EQ with FLS
- Master mute for channels 1-4
- On-board digital reverb
- RCA, 1/8" media input
- Dual power amp section
- RCA record outputs
- LED meter bridge
- Power amp sub-sonic filtering
- Footswitchable effects defeat
- PV 5300 all-in-one powered mixer1
- Power cord1
- Input Sensitivity
- Mic in to full power at the power amp; master volume nom.
- Full: -48dBu
- Nominal: -28dBu
- Line in to full power at the power amp; master volume nom.
- Full: -18dBu
- Nominal: +3dBu
- Channel EQ, Shelving EQ
- Low EQ: 80Hz ±15dB
- High EQ: 12kHz ±15dB
- Clip LEDclip LEDs come on 3dB before clipping
- Frequency Response (all controls nominal/detent)
- Mic to Main: 30Hz - 20kHz +0, -1dB
- Line to Main: 20Hz - 30kHz +0, -1dB
- Mic to Amp: 50Hz - 20kHz +0, -3dB
- Line to Amp: 40Hz - 20kHz +0, -3dB
- Noise
- All Controls Full Down
- Main: <-95dBu
- Amp 1: <-70dBu
- Master Volume Nominal
- Main: <-90dBu
- Amp 1: <-67dBu
- THD (all controls nominal)
- <0.01% @ main line output, -30 dBu in mic input
- <0.09% @ amp 1 with output adjusted to 45 Watts
- <0.005% @ main line output, +4 dBu in line input
- <0.08% @ amp 1 with output adjusted to 45 Watts
- Master EQ
- 80Hz +/-12dB
- 250Hz +/-12dB
- 1kHz +/-12dB
- 3kHz +/-12dB
- 10kHz +/-12dB
- Meter Array, Limit
- -6dB
- -12dB
- -18dB
- 24dB
- -30dB
- Amp LimiterLimits amplifier power just before clipping. The limiter holds the amp power without clipping and can be driven up to 18 dB past maximum output.
- Amplifier Output Power, 120VAC
- Both Channels Loaded at 8Ω
- 30 watts RMS per ch
- 60 watts peak per ch
- Both Channels Loaded at 4Ω
- 50 watts RMS per ch
- 100 watts peak per ch
- Power Requirements (domestic)120VAC 50/60Hz 40 watts nominal
- Dimensions (HxWxD)9" x 14" x 9"
- Weight14 pounds
