Peavey PVi 8500 All-In-One Powered Mixer

The Peavey PVi 8500 /PV 8500 is a revolutionary all-in-one powered mixer with everything a musician needs: up to eight combination XLR and 1/4" inputs using Peavey's awardwinning mic preamps, and 400 watts of peak power for crystal-clear audio reproduction. The Peavey PVi 8500 / PV8500 uses exclusive features like Mid Morph to accurately help improve tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's nine-band graphic EQ combined with our revolutionary FLS Feedback Locating System.

The PVi 8500 / PV8500 is equipped with Peavey's exclusive Kosmos-C technology, which drastically enhances both the low and high end of the audio spectrum. Footswitchable, built-in 24-bit digital effects complements the already feature-packed unit. Connect virtually any music device to this versatile mixer via the onboard 1/4", RCA and 1/8" mini jacks.

Peavey PVi 8500 Features

• FLS Feedback Locating System
• Master mute for channels 1-7
• Footswitchable effects defeat
• Combination XLR and 1/4" input jacks
• RCA, 1/8" Media input
• Selectable 9-band graphic EQ with FLS
• Selectable main or monitor dual power section
• RCA record outputs
• LED meter bridge
• Digital effects parameter control
• Power amp sub-sonic filtering
• On-board 24-bit digital effects with mute button
• Clip light and signal present indicator
• Kosmos-C
• Main line level 1/4" output
• Mid-Morph® EQ
• DDT™ speaker protection circuit
• 48 volt phantom power
• Bluetooth® streaming audio

• PVi 8500 all-in-one powered mixer1
• Power cord1

• Input Sensitivity
  • Mic in to full power at the power amp; master volume nom.
  • Full: -40dBu
  • Nominal: -22dBu
  • Line in to full power at the power amp; master volume nom.
  • Full: -10dBu
  • Nominal: +8dBu
• Channel EQ, Shelving EQ
  • Low EQ: 80Hz ±15dB
  • Mid-Morph Low: 250Hz ±15dB
  • High: 4kHz ±15dB
  • High EQ: 12kHz ±15dB
• Clip LEDclip LEDs come on 3dB before clipping
• Frequency Response (all controls nominal/detent)
  • Mic to Main: 20Hz - 20kHz +0, -1dB
  • Line to Main: 20Hz - 30kHz +0, -1dB
  • Mic to Amp: 50Hz - 20kHz +0, -3dB
  • Line to Amp: 40Hz - 20kHz +0, -3dB
• Phantom Power+48 volts
• Noise
  • All Controls Full Down
  • Main: <-95dBu
  • Amp 1: <-70dBu
  • Master Volume Nominal
  • Main: <-88dBu
  • Amp 1: <-67dBu
• THD (all controls nominal)
  • <0.01% @ main line output, -30 dBu in mic input Channel 1
  • <0.5% @ amp 1 @ 100 Watts into 4 Ohms
  • <0.005% @ main line output, +4 dBu in line input Channel 1
  • <0.5% @ amp 1 @ 100 Watts into 4 Ohms
• Master EQ
  • 63Hz ±12dB
  • 125Hz ±12dB
  • 250Hz ±12dB
  • 500Hz ±12dB
  • 1kHz ±12dB
  • 2kHz ±12dB
  • 4kHz ±12dB
  • 8kHz ±12dB
  • 12kHz ±12dB
• Meter Array, Limit
  • -6dB
  • -12dB
  • -18dB
  • -24dB
  • -30dB
• Amp LimiterLimits amplifier power just before clipping. The limiter holds the amp power without clipping and can be driven up to 18 dB past maximum output.
• Amplifier Output Power (120VAC)
  • Both Channels Loaded at 8Ω
  • 60 watts RMS per ch
  • 120 watts peak per ch
  • Both Channels Loaded at 4Ω
  • 100 watts RMS per ch
  • 200 watts peak per ch
• Power Requirements (domestic)120VAC 50/60Hz 74 watts nominal
• MP3 Player
  • Memory Device
  • SD Card: up to 32Gb SDHC card
  • Jump Drive: up to 32Gb memory device
  • File Format
  • MPEG 1/2/2.5 Layer 3: 32kbps-320kbps CBR/VBR bit rate
  • WMA: 32kbps-320kbps bit rate
  • PCM: bit rate N/A
  • Sample Rates: 8k/11.025k/12k/16k/22.05k/24k/32k/44.1k and 48k
• Bluetooth Player
  • Fully Bluetooth 3.0 + EDR system in 2.4GHz ISM band
  • Built-in internal ROM for program memory
  • Built-in 32 KB RAM for data storage and baseband data transfer buffering
  • Enhanced power control
  • High speed HCI-UART (universal asynchronous receiver transmitter) interface max. +4dBm output power with 20dB level control from register control
  • Extended wireless range up to 33 feet (10m)
• Dimensions (HxWxD)11.25" x 19.375" x 10.75"
• Weight22.2 pounds