Powersoft T302 A 2-Channel 1500W Power Amplifier with DSP

The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

Powersoft T302 A Features

• The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
• Full control with a PC running Armonía.
• Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
• Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
• Group controllable advanced EQ with raised cosine filters
• Large preset library
• Preset compatibility with X Series
• Very long FIR filters (42.6 ms)
• Control and monitoring through ArmoníaPlus

• T302 A 2-Channel 1500W Power Amplifier with DSP1

• Output power per channel
  • Output power per channel: 1500W @ 2Ω, 1500W @ 4Ω, 1200W @ 8Ω
  • Bridge mode: 3000W @ 4Ω, 3000W @ 8Ω
• Max output voltage / current
  • Max unclipped output voltage @8Ω: 145 Vpeak
  • Current: 50 Apeak
• AC Main Power
  • Power supply: Universal, regulated switch mode with PFC (Power Factor Correction)
  • Nominal power requirement: 100-240V ±10%, 50-60 Hz
  • Operating voltage: 90V – 264V
  • Power consumption/ Current draw
    • 1/8 of max output power @ 4Ω: 120V: 517 W – 4.6 A, 230V: 527W – 2.7 A
  • Thermal dissipation
    • 1/8 of max output power @ 4Ω: 120V: 485 BTU/h -122.2 kcal/h, 230V: 517 BTU/h -130.3 kcal/h