null Skip to main content
Powersoft T902 2-Channel Power Amplifier with DSP/Dante
Powersoft T902 2-Channel Power Amplifier with DSP/Dante

Powersoft T902 2-Channel Power Amplifier with DSP/Dante

(No reviews yet)
SoundPro Item: 124410
MPN: T902
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.

Powersoft T902 Features

  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía.
  • Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus
  • T902 2-Channel Power Amplifier with DSP/Dante1
  • Output power per channel
    • Output power per channel 4000W @ 2Ω: 3200W @ 4Ω, 1800 W @ 8Ω
    • Bridge mode: 8000W @ 4Ω, 6400W @ 8Ω
    • Max output voltage / current
      • Max unclipped output voltage @8Ω: 175 Vpeak
      • Current: 110 Apeak
  • AC Main Power
    • Power supply: Universal, regulated switch mode with PFC (Power Factor Correction)
    • Nominal power requirement: 100-240 V ±10%, 50-60 Hz
    • Operating voltage: 90V – 264V
    • Power consumption/ Current draw
      • 1/8 of max output power @ 4Ω: 120V: 1073 W – 9.6 A, 230V: 1068 W -5.3 A
  • Thermal dissipation
    • 1/8 of max output power @ 4Ω: 120V: 931 BTU/h, 230V: 913 BTU/h

In The Box

Customer Reviews