The QSC AD-S.SUB 6.5-Inch Surface Mount Subwoofer is ideally suited for background music applications that require depth and clarity at lower volume settings.
Experience deep, clear audio even at lower volumes. The AD-S.SUB from QSC’s AcousticDesign series is ideal in foreground and background sound reinforcement situations utilizing 70/100V or 16Ω bypass configurations. The AD-S.SUB features a 6.5" weather-treated paper cone woofer on a dual voice coil for improved thermal dissipation and higher output within a small form factor.
Mix and match to get the best background music performance for your application. The AD-S.SUB is compatible with up to four satellite speakers from the SUB/SAT line. Connections are located behind a reversible rear panel: the input panel offers cable tie anchor points, while the in-thru and outputs terminate to locking 4-pole Euroblock style connectors capable of 12AWG (2 mm) wire thickness.
Maintain an accurate frequency response even in 70/100V applications. The speaker’s low-loss, low-saturation 30-watt transformer offers selectable taps including a 4Ω bypass in mono mode. Among its many features, Intrinsic Correction™ voicings can be deployed to optimize installation and performance.
Install your speaker safely, securely, and swiftly. Each AcousticDesign model comes with the award-winning X-Mount™ system that is rotatable on all four 90° axes for simple and easy wall or ceiling installation in either horizontal or vertical orientations. The pivot planes feature knurled surfaces to prevent drifting or sagging over time, while articulation marks allow you to preconfigure the mounting system on the ground—without requiring special tools. The AD-S.SUB can also be configured via rotary selectors, while a two-piece mounting system and reversible wall mounting hardware provide even more versatile installation options.
AcousticDesign speakers are free of obtrusive branding. They’re available in black or white, as well as paintable to match any décor.
More about QSC’s AcousticDesign Series
Easy installation, flexible mounting options, and rugged, high-weather resistance are just three of the features that set QSC’s AcousticDesign™ series apart. These premium loudspeakers are designed to give contractors and integrators versatile, reliable solutions for permanent sound installations. Unified by premium audio quality and consistent tonal characteristics this series is comprised of ceiling, surface, and pendant alternatives ideal for environments where you need the perfect combination of performance, coverage, and aesthetic appeal.
QSC AD-S.SUB Features
- Dual voice-coil for improved thermal dissipation and higher output
- Low saturation and low-loss 70/100 V transformers in mono mode
- Low-Z mono or stereo configurable
- 4x built-in high-pass filtered outputs
- Locking 4-pole Euroblock connectors
- Reversible rear panel cover with cable tie anchors
- Reversible V-wall mount hardware
- Intrinsic Correction™ voicings available via MP-M Series mixers and Q-SYS Platform, including the CXD-Q Series amplifiers
- Available in black (RAL 9011) or white (RAL 9010)
- QSC AD-S.SUB 6.5" Dual Voice Coil Subwoofer1
- V-wall bracket1
- Euroblock connector4
- Rear cover panel1
- Adhesive rubber feet1
- LF transducer6.5-inch (165 mm) dual voice coil weather treated paper cone woofer
- HF transducerN/A
- Effective frequency range45 Hz – 150 Hz
- Rated noise power/voltage 100W/20V (rms)
- Sensitivity [dB] (rated @ 1 W, 1 m)86
- Coverage (‐6 dB) [°]Omni
- Directivity factorTBD
- Directivity index [dB]TBD
- Maximum SPL [dB] (continuous / peak)100 / 106
- Recommended amplifier100W
- Transformer taps / impedance
- 70V: 100, 50, 25, 12.5 W (mono only)
- 100V: 100, 50, 25W (mono only)
- Bypass4Ω mono or 8Ω + 8Ω stereo
- ConnectorsHi-Z mono input: 4-pole Euroblock with thru output
- Low-Z input4-pole Euroblock, left (mono) and right
- Hi-pass mono outputx2 4-Pole Euroblock for x4 satellites
- Enclosure materialVinyl wrapped medium density fiberboard
- Port baffle / cover panelABS
- Ingress protectionN/A
- Operating environmentDesigned for indoor use
- Operating temperature range-4 to 122° F (-20 to 50° C)
- Net weight23.6 lbs (10.7 kg)
- Product dimensions (Ø x H)13.8x8.2x17" (350x209x432 mm)
- Shipping weightTBD
- Shipping dimensions (HxWxDTBD
- Safety agencyTransformer UL registered per UL1876, ROHS, CE compliant
