The Roland DJ-707M, an integrated livestreaming sound console, multi-purpose audio interface, loudspeaker management system, and fully fledged performance DJ controller is equipped to handle the demanding audio needs of DJs doing more than playing music.
The DJ-707M leverages the DSP of Roland’s digital audio consoles to ensure you deliver the loudest, cleanest sound possible—whether it’s with your own PA system or the one already at the venue. Features are designed to handle the unexpected, like laptop crashes, surprise guest performers, videographer feeds, and painful audio challenges such as feedback.
Using the 10 onboard scenes, you can create ‘go-to’ event settings for audio routing, loudspeaker management and system setups—and recall them instantly. Scenes are a huge timesaver for standard event configurations, letting you switch settings for your different speaker systems and recall custom setups for venues where you play regularly.
Master, booth, and zone outputs all have independent loudspeaker management settings, including four-band EQ, multiband compression, limiter, and mono mode. It’s like having three speaker management processors built into one unit.
Connect two computers at once for a backup laptop connection or seamless DJ changeover. The USB B port also works as a standard USB audio interface capable of two-way communication with an iOS device, perfect for streaming to your favorite social media platform or playing a mix from your phone. There are also front-facing dual 1/4-inch jacks and 1/8-inch stereo aux input. Fully assignable zone output with dedicated level control is ideal for creating a separate mix for a videographer, sending different music to another area of the venue, or even adding a subwoofer.
Roland DJ-707M Features
- 10 onboard scenes to create scene presets
- Independent loudspeaker management settings
- Anti-feedback
- Dual USB ports, front-facing dual 1/4-inch jacks or 1/8-inch stereo aux input
- Fully assignable zone output
- Built for mobile use and to fit in tight booths
- Mic preamps have independent gain, low-cut, and noise gate on each channel
- Console-class Mic EQ and Effects
- Up to 4 mic inputs
- Serato DJ Pro fully supported
- Fully adjustable crossfader
- Channel filter and FX
- TR-Drums + Onboard Sound Effects
- DJ-707M DJ Controller1
- Startup Guide1
- Leaflet "USING THE UNIT SAFELY"1
- AC Adaptor1
- Power Cord1
- USB Cable1
- Signal Processing Sampling Frequency = 48 kHz
- Scene Memory10M
- Internal Effect
- Mic Effects
- Channel Effects
- Output Equalizer
- Output Multiband compressor
- Nominal Input Level
- INPUT (1–4) (RCA phono type, LINE): -12 dBu
- INPUT (1, 2) (RCA phono type, PHONO): -39 dBu
- MIC IN (1, 2) (XLR type): -60 dBu
- AUX IN (1/4-inch TRS phone type, AUX): 0 dBu
- AUX IN (1/4-inch TRS phone type, MIC): -40 dBu
- AUX IN (Stereo miniature phone type): -6 dBu
- Nominal Output Level
- MASTER OUT 1: +6 dBu (balanced)
- MASTER OUT 2: +0 dBu
- BOOTH OUT: +6 dBu (balanced)
- ZONE OUT: +0 dBu
- Input Impedance
- INPUT (1–4) (RCA phono type): 47 k ohms or greater
- MIC IN (XLR type): 7 k ohms or greater
- AUX IN (1/4-inch TRS phone type, AUX): 30 k ohms or greater
- AUX IN (1/4-inch TRS phone type, MIC): 7 k ohms or greater
- AUX IN (Stereo miniature phone type): 10 k ohms or greater
- Output Impedance
- MASTER OUT 1: 600 ohms (balanced)
- MASTER OUT 2: 1 k ohm (unbalanced)
- BOOTH OUT: 600 ohms (balanced)
- ZONE OUT : 1 k ohm (unbalanced)
- PHONES: 44 ohms
- Frequency Response48.0 kHz: 20 Hz–22 kHz (+0/-2 dB)
- Display16 characters, 2 lines (backlit LCD)
- Connectors
- INPUT (1–4) jacks: RCA phono type
- MIC IN (1, 2) connectors: XLR type
- AUX IN jacks: 1/4 inch TRS phone type, Stereo miniature phone type
- MASTER OUT 1 connectors: XLR type (balanced)
- MASTER OUT 2 jacks: RCA phono type
- BOOTH OUT jacks: 1/4 inch TRS phone type (balanced)
- ZONE OUT jacks: RCA phono type
- PHONES jacks: Stereo 1/4 inch phone type, Stereo miniature phone type
- PC (A, B) ports: USB B type
- MIDI OUT connector
- DC IN jack
- PHONO GROUND terminal
- Power Supply AC adaptor
- Current Draw2,000 mA
- Dimensions (W x D x H) 18-11/16 x 13-1/16 x 2-7/8 inches (474 x 331 x 73 mm)
- Weight (excluding AC adaptor) 7 lbs 12 oz (3.5 kg)
