[DISCONTINUED] Roland VAD503 V-Drums Electronic Drum Kit

Kick drum pedal, snare drum stand, hi-hat stand and drum throne sold separately.

When you need the glamor and presence of a full acoustic drum set on stage-but with the convenience and control of electronic drums-the VAD503 is the perfect solution. This premium 'one-up, one-down' kit features wooden shells with full depth and diameter, exquisitely finished and mounted on double-braced chrome stands for a look that will have the audience convinced you're playing acoustic drums. Roland's advanced digital sensor technology and dynamic TD-27 drum module provide the sound and response to match, making sure every stroke, ghost note, roll, and swell is fully expressed in incredible detail.

Roland VAD503 Features

• Four-piece V-Drums Acoustic Design kit with full-size wood shells and double-braced chrome stands
• TD-27 sound module with advanced Prismatic Sound Modeling derived from the flagship TD-50
• 14" PD-140DS digital snare and 18" CY-18DR digital ride cymbal with high-resolution, multi-sensor triggering for unparalleled dynamics and accurate positional detection
• 10" PDA100-MS rack tom, 14" PDA140F-MS floor tom, and 20" KD-200-MS kick with custom chrome hardware and Midnight Sparkle wraps
• Additional cymbal pads include 12" VH-10 V-Hi-Hat and 14" CY-14C-T crash
• Drum in inspiring sound spaces with newly developed PureAcoustic Ambience Technology
• Hands-on interface for quick-and-easy selecting and personalizing drum sounds
• Import your own WAV samples via an SD card
• Stereo mix output and two assignable outputs for sending individual drum sounds to a PA mixer
• Integrated 28-channel USB audio interface for professional computer music production
• Three auxiliary trigger inputs for easy kit expansion
• Onboard Bluetooth for drumming with music from a smartphone or laptop
• Built-in practice functions for developing drumming skills

• TD-27 Sound module1
• PD-140DS Snare1
• PDA100-MS Tom11
• PDA140F-MS Tom31
• VH-10 Hi-hat1
• CY-14C-T Crash11
• CY-18DR Ride1
• KD-200-MS Kick1
• DCS-10 Drum stand1
• DBS-10 Drum boom stand1
• APC-10 Clamp1
• Sound module mount1
• AC adaptor1
• Special connection cable1
• Drum key1

• TD-27 Drum Sound Module
  • Drum Kits: 100 (Preset: 55)
  • Instruments: 728
  • User Sample Import
  • Number of User Samples: max 500 (includes factory preloaded user samples)
  • Sound Length (total): 24 minutes in mono, 12 minutes in stereo
  • File Formats that can be Loaded: WAV (44.1 kHz, 16/24 bits)
  • Effect Types
  • Pad Compressor: each pad
  • Pad Equalizer: each pad
  • Overhead Mic Simulator
  • Room/Reverb
  • Mutli-Effects: 3 systems, 30 types
  • Master Compressor
  • Master Equalizer
  • Bluetooth
  • Supported Standards: Bluetooth Ver 4.2
  • Supported Profile: A2DP (audio), GATT (MIDI over Bluetooth Low Energy)
  • Codec: SBC (support to the content protection of the SCMS-T method)
  • Song Player (SD Card) File Format: WAV (44.1 kHz, 16/24 bits), MP3
  • Recorder
  • Recording Method: realtime
  • Max Length: 60 min (requires SD card; recording without SD card has max length of 3 min)
  • File Format: WAV (44.1 kHz, 16 bits)
  • Display: graphic LCD 256 x 80 dots
  • External Memory: SD Card (SDHC supported)
  • Connectors
  • TRIGGER INPUT connector x 1: DB-25 type
  • TRIGGER IN jack x 4: 1/4" TRS phone type
  • DIGITAL TRIGGER IN port x 3: USB A type
  • MASTER OUT jacks (L/MONO, R): 1/4" phone type
  • DIRECT OUT jack x 2 (MONO): 1/4-inch phone type
  • PHONES jack x 1: Stereo 1/4-inch phone type
  • MIX IN jack x 1: Stereo 1/4-inch phone type
  • MIDI (IN, OUT/THRU) connectors
  • USB COMPUTER port x 1: USB B type
  • FOOT SW jack x 1: 1/4-inch TRS phone type
  • DC IN jack
  • USB Computer
  • Speed: Hi-speed USB
  • Driver Mode: Generic, Vender
  • Protocol: USB MIDI, USB Audio
  • USB Audio
  • Sampling Rate (original): 44.1 kHz
  • Sampling Rate (with sampling rate converter): 96 kHz, 48 kHz
  • Record: 28 channels
  • Playback: 4 channels
  • Power Supply: AC adaptor
  • Current Draw: 770 mA
• PD-140DS Snare
  • Pad Size: 14"
  • Shell Depth: 4.3"
  • Tension Rods: 8
  • Head: 3-ply mesh head (floating mid-layer structure)
  • Available Playing Methods (Triggers)
  • Head Shot (high resolution positional detection, wide dynamic range)
  • Rim Shot (depth detection, wide dynamic range)
  • Cross Stick (automatic switching)
  • Brush sweep
  • Sensor System
  • Multi Element Sensor System
  • Head Sensor
  • Position Sensors x3
  • Rim Sensor
  • Cross Stick Sensors x3
  • Built-in Sensing Processor
  • Supported Covering Size: 3.86" wide x 41.73" length (1 mm or less in thickness)
  • Connector: DIGITAL TRIGGER OUT plug
  • Power Supply: supplied from DIGITAL TRIGGER IN port
  • Current Draw: 90 mA
  • Dimensions (WxDxH): 15" x 15" x 6.3"
  • Weight: 10.8 pounds
• PDA100-MS Tom1
  • Shell: 10" diameter x 7" depth
  • Head: 2-ply mesh head (on top and bottom)
  • Triggers: 2 (head, rim)
  • Connector: output jack
  • Allowable Diameter of Mounting Rod: 9-13mm
  • Dimensions (WxDxH): 11.61" x 13" x 8.27"
  • Weight: 6.44 pounds
• PDA140F-MS Tom3
  • Shell: 14" diameter x 14" depth
  • Head
  • Top: 3-ply mesh-head (floating mid-layer structure)
  • Bottom: 2-ply mesh head
  • Triggers: 2 (head, rim)
  • Connector: output jack
  • Dimensions, Excluding Legs (WxDxH): 16.38" x 16.9" x 15.1"
  • Weight, Exlcuding Legs: 14.1 pounds
• VH-10 Hi-Hat
  • Size: 12"
  • Triggers: 2 (bow, edge)
  • Connectors: TRIGGER OUTPUT jack, CONTROL OUTPUT jack
  • Acceptable Rod Diameter: 6-7 mm
  • Dimensions (WxDxH): 12.38" x 12.38" x 4.1"
  • Weight: 2.69 pounds
• CY-14C-T Crash1
  • Size: 14"
  • Triggers: 2 (bow, edge)
  • Connectors: BOW/EDGE OUTPUT jack
  • Dimensions: 14.1" x 14.1" x 1.9"
  • Weight: 2.25 pounds
• CY-18DR Ride
  • Size: 18"
  • Available Playing Methods (Triggers)
  • Bow Shot (high resolution position detection, wide dynamic range)
  • Bell Shot (wide dynamic range)
  • Edge Shot (wide dynamic range)
  • Choke (choke edge, bow touch)
  • Sensor System
  • Multi Element Sensor System
  • Bow Sensor x 3
  • Bell Sensor
  • Edge Sensor
  • Touch Sensor
  • Built-in Sensing Processor
  • Connectors: DIGITAL TRIGGER OUT port
  • Power Suply: supplied from DIGITAL TRIGGER IN port
  • Current Draw: 90 mA
  • Dimensions (WxDxH): 18.56" x 18.56" x 2.19"
  • Weight: 4.69 pounds
• KD-200-MS Kick
  • Shell: 20" diameter x 16" depth
  • Trigger: 1 (head)
  • Acceptable Pedal: single pedal, twin pedal
  • Connectors: TRIGGER OUTPUT jack
  • Dimensions (WxDxH): 24.9" x 20" x 20.8"
  • Weight: 24.1 pounds
• Overall Kit Dimensions
  • Dimensions (WxDxH): 66.94" x 55.12" x 47.25"
  • Weight: 92.63 pounds