null Skip to main content
Sennheiser XSW IEM Set (A) Wireless In-Ear Monitoring System
Sennheiser XSW IEM Set (A) Wireless In-Ear Monitoring System
$599.00

Sennheiser XSW IEM Set (A) Wireless In-Ear Monitoring System

(No reviews yet)
SoundPro Item: 131179
MPN: XSW IEM Set (A)
MSRP: $699.00
$599.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

Out of the box, the XS Wireless IEM set has all the components you need to set up your personal monitoring in minutes. XS Wireless IEM is the entry to Sennheiser’s renowned in-ear monitoring sound. It delivers the whole potential of in-ear monitoring with an elegant, easy-to-use interface. No tech expertise is needed to get all the benefits: You hear yourself perfectly in any environment and can aim for new levels of perfection.

The system includes a rugged transmitter, a lightweight bodypack receiver, IE 4 in-ear starter headphones, batteries, a power supply with multi-voltage adapter, and a rack mount kit for the transmitter.

Eight pre-configured frequency banks in the professional UHF range (with 12 perfectly aligned channels each) keep your connection reliable and clear in every situation. Standard and advanced features make XS Wireless IEM flexible in both small and large applications. The series scales with your demands during rehearsals or live shows, on a club stage or for a worship service. Multiple audio modes match varying performances and mixing demands. You can easily change to mono, stereo, or a two-channel focus mode.

The stereo receiver bodypack, although lightweight, is designed with live stages in mind. Setting options are well secured behind a stage-proof panel. A status LED keeps you informed about battery and connection status, while the LC display offers access to further settings. You can fine-tune your preferred focus mode for in-ear monitoring, balance your mix, switch the EQ to enhance the higher frequencies, or select your channel or a manual frequency.

The stereo transmitter comes with a rugged metal housing. Fine-tuning the most important options has never been easier. Whether you want to increase gain, check the frequency setup, or sync some more receivers for your band setup: It all needs fewer clicks than the count-in of your drummer. A rack mount kit and a removable antenna allow for flexible setups and configurations.

The set also includes a pair of IE 4 in-ear headphones. They reproduce outstanding sound quality and high dynamics, and are equipped with exchangeable ear sleeves to give a secure and comfortable fit. You get a good isolation from environmental noise as well as a very good bass response.

Sennheiser XSW IEM Set (A) Features

  • Complete starter set for in-ear monitoring
  • Reliable, easy-to-manage wireless connection in the professional UHF range
  • Full control with flexible audio modes
  • Focus mode to balance your personal mix
  • Advanced features like EQ and limiter
  • Easy frequency presets or detailed manual control
  • Infrared sensor to sync multiple receivers easily to one transmitter
  • XSW IEM SR transmitter1
  • XSW IEM EK receiver1
  • IE 4 In-Ear Headphones1
  • XSW Rack Mount Kit1
  • NT 12-5 CW power supply incl. country adapters1
  • AA batteries2
  • Quick guide1
  • Safety Guide1
  • XSW IEM EK Stereo Receiver
    • Frequency Ranges (RF Output Power)
      • A 476-500 MHz (30 mW)
      • B 572-596 MHz (30 mW)
      • C 662-686 MHz (30 mW)
      • E 823,2-831,8 MHz (30 mW)
      • K 925,2-937,3 MHz (10 mW)
    • Dimensions: Approx. 95x70x26 mm
    • Weight (incl. batteries): ca. 110 g
    • Switching bandwidth: up to 24 MHz
    • Temperature Range: 0°C to +40°C
    • AF frequency response: 45Hz to 15kHz
    • Modulation: Wideband FM
    • Signal-to-noise ratio (1 mV, peak deviation): ≥88 dB
    • AF output level at 3.5 mm: 2 x 1,25 Veff at 16Ω
    • High Boost (EQ): +10 dB at 13 kHz
    • Total harmonic distortion (THD): ≤ 1 %
    • Limiter: -10 dB
    • Power supply: 2 AA batteries, 1.5V
    • Operating time: Approx. 6 hrs
  • XSW IEM SR Stereo Transmitter
    • Frequency Ranges (RF Output Power)
      • A 476-500 MHz (30 mW)
      • B 572-596 MHz (30 mW)
      • C 662-686 MHz (30 mW)
      • E 823,2-831,8 MHz (30 mW)
      • K 925,2-937,3 MHz (10 mW)
    • Dimensions: Approx. 200x128x42 mm
    • Weight: Approx. 700 g
    • Switching bandwidth: up to 24 MHz
    • Temperature Range: 0 °C to +40 °C
    • AF frequency response: 45 Hz to 15 kHz
    • Modulation: FM Stereo
    • Signal-to-noise ratio (at nominal load and peak deviation): ≥88 dB
    • Current consumption: Approx. 400mA (depending on volume level)
    • Input rating: +12 V DC
    • Input: 2x XLR-3/¼" (6.3 mm) jack combo socket, electronically balanced
    • Antenna Output: BNC socket, 50Ω
  • NT 12-5CW Power supply
    • Input voltage range: 100 to 240 V~200mA, 50/60 Hz
    • Storage temperature: -20°C ... +60°C (4 °F ... +140 °F)
    • Output voltage: +12 V DC
    • Temperature Range: 0°C ... +40°C (32°F ... +104°F)
    • Current consumption: Max. 200 mA
    • Secondary output current: 500 mA

In The Box

Videos Hide Videos Show Videos

Customer Reviews