Axient antenna distribution system delivers ultra-linear amplification and precision filtering for optimal performance. Features include wideband filtering and up to 15 dB of selectable RF attenuation for signal-to-noise optimization. The AXT630 covers the 470-698MHz frequency range.
With this antenna distribution system you can send the RF signal from a single pair of antennas to multiple receivers. Ultra-linear amplification and adjustable attenuation optimize performance in difficult RF environments. Selectable input filters match the available frequency bands of transmitters, providing extra protection from strong out-of-band signals. BNC antenna output pairs distribute band-filtered signals to up to 4 receivers. A pair of wideband cascade ports supply wideband RF signals to Spectrum Managers or additional antenna distribution amplifiers. Networking allows Wireless Workbench to control filtering ranges and attenuation. For added flexibility, Axient Antenna Distribution Systems are compatible with Shure ULX-D and UHF-R receivers.
Shure AXT630 Features
- Selectable input filtering provides system-wide protection against strong out-of-band signals
- Wideband filtering option covers multiple bands
- Up to 15dB of selectable RF attenuation for signal-to-noise optimization
- Front panel interface nad Wireless Workbench 6 software control provide easy setup and control of filtering, antenna power, and attenuation
- BNC outputs: 4 antenna output pairs
- Wideband RF cascade port with selectable 3dB make-up gain for connecting wideband devices
- Ethernet Networking: 2 PoE enabled Ethernet ports
- IEC power ports enable daisy-chaining of AC power
- AXT630 Axient antenna distribution system1
- 2 ft coaxial antenna cable12
- IEC AC power cable1
- IEC AC extension cable1
- Shielded 3 ft Ethernet cable1
- Shielded 8" Ethernet jumper cable1
- Hardware kit1
- 22" coaxial cable1
- 33" coaxial cable1
- RF Input
- Connector Type: BNC
- Configuration: unbalanced, active
- Band Filters
- Wideband: 470-698MHz
- Band G1: 470-530MHz
- Band H4: 518-578MHz
- Band J5: 578-638MHz
- Band L3: 638-698MHz
- Impedance: 50Ω
- Bias Voltage: 12 V DC, 150mA (300mA max.)
- RF Frequency Range: 470-698MHz
- Distribution Output
- Connector Type: BNC (4 pairs)
- Configuration: unbalanced, active
- Impedance: 50Ω
- Gain Adjustment Range
- Cascade Enabled: -15dB to 0dB (in 1dB steps)
- Cascade Disabled: -12dB to +3dB (in 1dB steps)
- Output Intercept Point: >25dBm, typical
- Cascade Output
- Connector Type: BNC (1 pair)
- Configuration: unbalanced, wideband
- Impedance: 50Ω
- Insertion Loss: <5dB
- Networking
- PoE: 50 V DC, Class 1
- Network Interface: dual Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Power Requirements100 to 240 V AC, 50-60Hz
- Current Drain1.0 A RMS (referenced at 120 V AC)
- Housingsteel and extruded aluminum
- Operating Temperature Range0°F to 145°F (-18°C to 63°C)
- Dimensions (HxWxD)1.7" x 19" x 14.4"
- Weight10.1 pounds
