Shure P3TRA215CL In-Ear Monitoring Set

P3TRA215CL features SE215 Sound Isolating™ Earphones, all-metal components with optional receiver rechargeability, and more advanced receiver controls. PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.  Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.

Shure P3TRA215CL Features

• Send two channels of audio wirelessly to performers onstage
• 24-bit digital audio provides clear, detailed sound
• Patented Audio Reference Companding sounds more like wired
• Up to 90 dB signal-to-noise ratio
• Exceptionally wide stereo separation
• Solid analog RF connection over a 300 ft (90 m) range
• Create a personal mix from the bodypack with MixMode® technology or stereo mode
• Frequency scan and IR sync quickly finds and assigns a clean channel

• PSM300 Transmitter P3T1
• P3RA Wireless Bodypack Receiver1
• SE215 Sound Isolating™ Earphones1

• P3T
  • RF Output Power: 10, 20, 30 mW
    • Note: varies by region
  • RF Output Impedance: 50 Ω (typical)
  • Net Weight: 27.6 oz (783 g)
  • Dimensions (H × W × D): 1.7 × 7.8 × 6.8 inches (43 × 198 × 172 mm)
  • Power Requirements: 12–15 V DC, 260 mA maximum
  • Audio Input
    • Connector Type: 6.35 mm (1/4") TRS
    • Polarity: Tip positive with respect to ring
    • Configuration: Electronically balanced
    • Impedance: 40 kΩ (actual)
    • Nominal Input Level: Switchable, +4 dBu, -10 dBV
    • Maximum Input Level: +4 dBu: +22 dBu -10 dBV: +12.2 dBu
    • Pin Assignments: Tip=hot, Ring=cold, Sleeve=ground
    • Phantom Power: Protection Up to 60 V DC
  • Audio Output
    • Connector Types: 6.35 mm (1/4") TRS
    • Configuration: Electronically balanced
    • Impedance: Connected directly to inputs
• P3RA
  • Active RF Sensitivity (at 20 dB SINAD): 2.2 μV
  • Image Rejection: >90 dB
  • Adjacent Channel Rejection: >60 dB
  • Intermodulation Attenuation: >50 dB
  • Blocking: >60 dB
  • Audio Output Power (1 kHz @ <1% distortion, peak power, @32 Ω): 80 mW (per output)
  • Minimum Load Impedance: 16 Ω
  • Headphone output: 3.5 mm (1.8") stereo
  • Net Weight (with batteries): 6.9 oz (196 g)
  • Dimensions (H × W × D): 99 × 66 × 23 mm
  • Battery Life (continuous use)
    • 4–5.5 hours, AA batteries
    • 5.5–7 hours, SB900A battery
• SE215
  • Transducer Type: Single High-Definition MicroDriver
  • Sensitivity (at 1 kHz): 107 dB SPL/mW
  • Impedance (at 1 kHz): 17 Ω
  • Frequency Range: 22 Hz–17.5 kHz
  • Net Weight: 1 oz (30 g)