
- Transducer TypeCondenser
- Polar PatternHypercardioid
- Frequency Response
- VP89L: 40-20,000 Hz
- VP89M: 50-20,000 Hz
- VP89S: 65-20,000 Hz
- Output Impedance115.0Ω
- Sensitivity
- open circuit voltage, @ 1 kHz, typical
- -33.5 dBV/Pa[1] (21.1 mV)
- Maximum SPL (1 kHz at 1% THD[2])
- 2500Ω load: 132.0 dB SPL
- 1000Ω load: 128.5 dB SPL
- Signal-to-Noise Ratio[3]79.0 dB
- Dynamic Range (@ 1 kHz)
- 2500Ω load: 117.0 dB
- 1000Ω load: 113.5 dB
- Clipping Level (@ 1 kHz, 1% THD)
- 2500Ω load: 4.0 dBV
- 1000Ω load: 0.0 dBV
- Self Noise
- equivalent SPL, A-weighted, typical
- 15.0 dB
- Common Mode Rejection
- 20 to 20,000 Hz
- ≥70.0 dB
- Low-Frequency Filter Switch (-12 dB/oct below specified frequency)
- Flat Response: 100 Hz
- Low Frequency Rolloff: 200 Hz
- Power Requirements11–52 V DC[4] phantom power (IEC-61938), <2.0 mA
- Net Weight
- VP89L: 174 g (6.1 oz.)
- VP89M: 138 g (4.9 oz.)
- VP89S: 117 g (4.1 oz.)
- Note
- [1] 1 Pa=94 dB SPL
- [2]THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
- [3]S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
- [4]All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
Why Choose SoundPro?
Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.