The Williams AV IR SY21 D Dante Infrared Transmitter System is a commercial-grade, large-area Dante infrared system with IR+ transmitter, 2 emitters and array.
Williams AV IR SY21 D Features
- Commercial-grade
- Large-area infrared system
- Dante enabled
- Includes IR+ transmitter, 2 emitters, and array
- IR M1 D infrared modulator with Dante input1
- IR E4 emitters2
- IR A4 array1
- WIR RX22-4N receiver4
- BAT KT6 dual bay chargers2
- EAR 022 earphones4
- IDP 008 ADA wall plaque1
- IR M1
- Dimensions: 19” (W) x 1.75” (H) x 8.2” (D) (48.3 cm x 4.5 cm x 20.8 cm)
- Weight: 5.2lb. (2.4 kg)
- Color: Black
- Rack Mount: Single Rack Unit
- Power Supply: International Desktop Supply
- Input: 36 W, 110-240 VAC 50-60 Hz
- Output: +48VDC, 0.75A center-positive
- Power Switch: Rocker switch with LED
- Signal to Noise Ratio: 67 dB (typical)
- Modulation: FM Wideband, +50kHz deviation, 50uS pre-emphasis
- Carrier Frequency: Selectable, 2.3/2.8 or 3.3/3.8MHz
- Frequency Response: 40 to 16,000Hz, +1 dB, -3dB, electrical response
- Total Harmonic Distortion: Less than 2%, electrical response
- Audio Processor Functions: DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
- Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
- Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing.
- Audio Input: (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
- Dante: Optional
- Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
- Remote Configuration: Available through embedded website
- Headphone Output: (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs
- Emitter Output Jack: Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission.
- Operating requirements: 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
- Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
- Warranty: 2 years on Modulator, 90 days on accessories
- IR E4
- Dimensions: 7.5” (W) x 1.4” (H) x 3.6” (D) (19.1 cm x 3.6 cm x 9.1 cm)
- Weight: 0.8 lb (362 g)
- Color: Black
- Power: 48 VDC supplied by IR M1 via CAT 5e cable.
- Coverage Area: Up to 18,000 square feet in single channel mode
- Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
- Operating requirements: 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
- Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
- Warranty: 2 years on Emitter; 90 days on accessories
- IR A4
- Dimensions: 7.6"W x 6.6"D x 1.1"H (193mm x 168mm x 28mm)
- Weight: 2.4 lb (1100g)
- Color: Black
- Power: 48 VDC, 0.75A
- Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR transmission are all provided via CAT5e cable(s) inserted into an RJ-45 jack from the IR M1 and out to the IR E4(s).
- Heat Dissipation: 1W
- Max Cable Length: 328 feet (100m)
- Plenum Rating: The IR A4 is not rated for use in plenum spaces and will need to be installed in a plenum box for use in such areas.
- Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
- Warranty: 2 years
- WIR RX22
- Receiver Style: Body-Pack, dual-lens detector, lanyard
- Size: 4.1″ L x 2.85″ W x 1.2″ H (104.1 mm x 72.4 mm x 30.4 mm)
- Weight: 4.5 oz (127 g) with batteries
- Color and Material: Black
- Lanyard: 3 ft (0.91 m), allows receiver to be worn around the neck
- Operating Temperature: -10° C to +50° C
- Battery Type: 2 x AA, alkaline (BAT 001-2) or NiMH (BAT 026-2)
- Battery Life: Alkaline: 60 hours, NiMH: 30 hours/charge
- Battery Drain: 25 mA, nominal
- Charging Contacts: For use only with CHG 3512
- Carrier Frequency
- Channel 1: 2.3 MHz, Channel 2: 2.8 MHz
- Channel 3: 3.3 MHz, Channel 4: 3.8 MHz
- De-Emphasis: 50 uS
- FM Deviation: ±50 kHz
- Signal-to-Noise Ratio: 60 dB min.
- Squelch: Receiver squelches (mutes) at 28 dB S/N ratio
- Frequency Response: 25 Hz to 16 KHz, +1 dB, -3 dB, electrical response
- Total Harmonic Distortion: Less than 1%, electrical response
- Controls: ON/OFF/VOLUME: combination thumbwheel knob
- Channel Selector: four-position rotary switch
- Indicators: Red LED “ON” indicator, flashes to indicate Low battery
- Audio Output Jacks: 3.5 mm stereo mini phone jack Accepts 3.5 mm mono or stereo phone plug
- Audio Output Power: 15 mW max at 32 Ω
- Acoustic Output: 125 dB SSPL90 with HED 021; 110 dB SSPL90 w/ EAR 013
- Sensitivity: Better than 1 nW/cm2 for 40 dB signal-to-noise ratio
- Approvals: CE, FCC, RoHS, WEEE
- Warranty: 5 years on receiver, 90 days on accessories
- Compatible Headphones/Earphones: Mono or stereo, 8-32 ohms, 3.5 mm mini phone plug, HED 021, HED 026, EAR 013, EAR 014, EAR 022, NKL 001
- CHG 3502
- Dimensions: 4-7/8″L x 3-7/8″”W x 2″H (12.4 cm L x 9.8 cm W x 5.1 cm)
- Shipping Weight: 1.1 lbs (0.5 kg)
- Enclosure: Black, ABS plastic
- Charger Power
- Input: 6 VDC, 300mA, Center Positive
- Output: 100mA per bay
- Power Supply: Williams Sound TFP 041 (US)
- Input: 100-240 VAC, 50-60Hz, 0.5-0.3 A
- Output: 6 VDC, 1.5 A.
- Charging Time: 16 hours nominal*
- Unit Capacity: 2 Units
- Indicators: 2 Red LEDs – one for each bay. LEDs are lit when charging.
- Warranty: 2-year
- Approvals: CE, FCC, RoHS
- EAR 022
- Style: Around-ear speaker
- Plug: 3.5mm mono
- Cord: 39"
- Driver Size: 23 mm
- Nominal Impedance: 32Ω
- Freq. Response: 20 - 20kHz
- Weight: 15g
- Max Power Input: 30 mW
- Sensitivity: 118 dB @ 1kHz
- IDP 008 10-3/8" (L) x 6-¼" (W) x 1/8" (H)
