null Skip to main content
Williams AV IR SY23 D Large-Area Infrared Transmitter System with Dante
Williams AV IR SY23 D Dante Infrared Transmitter System
$5,747.00

Williams AV IR SY23 D Dante Infrared Transmitter System

(No reviews yet)
SoundPro Item: 115512
MPN: IR SY23 D
MSRP: $6,385.00
$5,747.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

Commercial-grade, large-area Dante infrared system with IR+ transmitter, 2 emitters and array. Comes with Stethoset Receivers.

Williams AV IR SY23 D Features

  • Commercial-grade
  • Large-area Dante infrared system
  • Includes IR+ transmitter, 2 emitters, and array
  • Comes iwth Stethoset Receivers
  • IR M1 D infrared modulator with Dante input1
  • IR E4 emitters2
  • IR A4 array1
  • IR RX20 receivers5
  • CHG 520 charger1
  • IDP 008 ADA wall plaque1
  • IR M1
    • Dimensions: 19” (W) x 1.75” (H) x 8.2” (D) (48.3 cm x 4.5 cm x 20.8 cm)
    • Weight: 5.2lb. (2.4 kg)
    • Color: Black
    • Rack Mount: Single Rack Unit
    • Power Supply: International Desktop Supply
    • Input: 36 W, 110-240 VAC 50-60 Hz
    • Output: +48VDC, 0.75A center-positive
    • Power Switch: Rocker switch with LED
    • Signal to Noise Ratio: 67 dB (typical)
    • Modulation: FM Wideband, +50kHz deviation, 50uS pre-emphasis
    • Carrier Frequency: Selectable, 2.3/2.8 or 3.3/3.8MHz
    • Frequency Response: 40 to 16,000Hz, +1 dB, -3dB, electrical response
    • Total Harmonic Distortion: Less than 2%, electrical response
    • Audio Processor Functions: DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
    • Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
    • Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing.
    • Audio Input: (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
    • Dante: Optional
    • Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
    • Remote Configuration: Available through embedded website
    • Headphone Output: (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs
    • Emitter Output Jack: Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission.
    • Operating requirements: 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
    • Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
    • Warranty: 2 years on Modulator, 90 days on accessories
  • IR E4
    • Dimensions: 7.5” (W) x 1.4” (H) x 3.6” (D) (19.1 cm x 3.6 cm x 9.1 cm)
    • Weight: 0.8 lb (362 g)
    • Color: Black
    • Power: 48 VDC supplied by IR M1 via CAT 5e cable.
    • Coverage Area: Up to 18,000 square feet in single channel mode
    • Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
    • Operating requirements: 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
    • Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
    • Warranty: 2 years on Emitter; 90 days on accessories
  • IR A4
    • Dimensions: 7.6"W x 6.6"D x 1.1"H (193mm x 168mm x 28mm)
    • Weight: 2.4 lb (1100g)
    • Color: Black
    • Power: 48 VDC, 0.75A
    • Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR transmission are all provided via CAT5e cable(s) inserted into an RJ-45 jack from the IR M1 and out to the IR E4(s).
    • Heat Dissipation: 1W
    • Max Cable Length: 328 feet (100m)
    • Plenum Rating: The IR A4 is not rated for use in plenum spaces and will need to be installed in a plenum box for use in such areas.
    • Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
    • Warranty: 2 years
  • IR RX20
    • Weight: 1.6 oz
    • Material and Color: IR Transparent polycarbonate, black
    • Battery Type: LiPo
    • Battery Life: 8 hours
    • Battery Charger: CHG 520
    • Operating Temp: 32-122° F (0-50° C)
    • Range: Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter
    • Operating Frequency: 2.3 MHz or 2.8 MHz or stereo
    • Frequency Response: 100 Hz to 12 kHz, ± 3 dB
    • Signal to Noise Ratio: 60 dB at 10 m
    • Controls: Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power
    • Acoustic Output: 120 dB MAX SSPL90 with 2 cc coupler
    • Compatibility: Compatible with 2.3 MHz and 2.8 MHz IR transmitters
    • Headphone Jack: 3.5mm stereo
    • Ear pads: EAR 089
    • Approvals: CE, RoHS, FCC, Canada, RCM, VCCI, WEEE
    • Warranty: 5 years (90 days on battery)
  • CHG 520
    • Dimensions: 12″L x 6.25″W x 1.5″H (30.48 cm x 15.875 cm x 3.81 cm)
    • Weight: 13.6 lbs
    • Color: Black metal and plastic
    • Power Supply Input: 120 VAC
    • Power Supply: 100-240V / 12VDC TFP 043
    • Unit Capacity: 5 Units
    • Indicators: Individual Charging Indicators: Red LEDs
    • Warranty: 1 year (90 day warranty on cables and power supply)
    • Approvals: WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI
  • IDP 008 10-3/8" (L) x 6-¼" (W) x 1/8" (H)

In The Box

Customer Reviews