null Skip to main content
Williams AV IR SY7 Medium-Area Infrared Transmitter System with PoE
Williams AV IR SY7 Infrared Transmitter System with PoE
$1,381.00

Williams AV IR SY7 Infrared Transmitter System with PoE

(No reviews yet)
SoundPro Item: 115509
MPN: IR SY7
MSRP: $1,535.00
$1,381.00
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

Commercial-grade, medium-area infrared transmitter system with PoE. The IR T2 can be controlled remotely via RS-232 commands. The commands include: power on/off, remotely setting IR frequency, muting ongoing audio, turning back panel LEDs on/off, troubleshooting, and more. The IR T2 can also be powered over Ethernet using the included POE KT1 remote power kit. This kit includes the WCA 133 for wiring directly to a power supply, and does not include the alternative cable WCA 132 which is for wiring to a switch.

Williams AV IR SY7 Infrared Transmitter System with PoE Features

  • Commercial-grade, medium-area infrared transmitter system with PoE
  • The IR T2 can be controlled remotely via RS-232 commands
  • The IR T2 can also be powered over Ethernet using the included POE KT1 remote power kit
  • IR T2 infrared transmitter1
  • WIR RX22-4N receivers2
  • HED 027 headphones2
  • NKL 001 neckloop1
  • CHG 3502 2-bay bodyback charger1
  • BAT 026-2 NiMH rechargeable batteries2
  • POE KT1 remote power kit including WCA 131 and WCA 1331
  • BKT 024 mounting bracket1
  • IDP 008 ADA wall plaque1
  • TFP 057 power supply1
  • Two Year Warranty1
  • IR T2
    • Dimensions: 9.0″ W (229 mm) x 3.8″ D (97 mm) x 1.4″ H (36 mm)
    • Weight: 0.84 lb. (0.38 kg)
    • Color: Black
    • Power Supply: TFP 057 Desktop style international certified power supply with IEC line cord, 100-240 VAC input, 50-60 Hz, 18 W; 48 VDC output
    • DC Power Input: 2.1 mm ID barrel connector, 48 VDC, 0.2A, center positive
    • Power Indicator: Green LED
    • Sleep/Power Save Mode: Shuts off IR when no audio present for 12 minutes
    • Modulation: FM Wideband, ±50 kHz deviation max, 50 μS pre-emphasis
    • Baseband Frequencies: 2.3, 2.8, 3.3, 3.8 MHz
    • Coverage Area
      • Up to 18,000 sq. ft (1,673 sq. m) in single-channel mode with the RX22-4 receiver
      • Up to 11,500 sq. ft (1,068 sq. m) with the RX20 receiver
    • Microphone gain adjust: Rotary 10 dB range
    • Microphone channel switch: Selects microphone input to Ch. A or Ch. B
    • Microphone input: 3.5 mm, stereo jack with signal and bias connected to tip, electret microphone compatible (6 VDC bias supply with 2.7 k ohm series resistor)
    • Audio Inputs: Line inputs: Phoenix style connector jack for Ch A and Ch B accept line level, balanced or unbalanced audio
    • Audio Indicators: One yellow LED per channel. Lights up and stay on steady with minimum audio level.
    • Signal-to-Noise Ratio: 70 dB (line input)
    • Frequency Response
      • 95 Hz to 17.6 kHz, -3 dB re 1 kHz (line inputs)
      • 125 Hz to 17.0 KHz, -3 dB re 1 kHz (microphone input)
    • Operating Requirements: 32°-122°F (0-50°C)
    • Mounting Kit: Wall or Ceiling mount: BKT 024 Omnidirectional mount
    • Compatible Receivers: WIR RX22-4, IR RX20
    • Warranty: 5-year warranty against component failure and manufacturing defects. See Full Warranty statement on the website for details.
    • Approvals/Regulatory Compliance: CE, FCC, Industry Canada, WEEE, RoHS, CB Scheme, RCM, PSE
  • WIR RX22
    • Receiver Style: Body-Pack, dual-lens detector, lanyard
    • Size: 4.1″ L x 2.85″ W x 1.2″ H (104.1 mm x 72.4 mm x 30.4 mm)
    • Weight: 4.5 oz (127 g) with batteries
    • Color and Material: Black
    • Lanyard: 3 ft (0.91 m), allows receiver to be worn around the neck
    • Operating Temperature: -10° C to +50° C
    • Battery Type: 2 x AA, alkaline (BAT 001-2) or NiMH (BAT 026-2)
    • Battery Life: Alkaline: 60 hours, NiMH: 30 hours/charge
    • Battery Drain: 25 mA, nominal
    • Charging Contacts: For use only with CHG 3512
    • Carrier Frequency
      • Channel 1: 2.3 MHz, Channel 2: 2.8 MHz
      • Channel 3: 3.3 MHz, Channel 4: 3.8 MHz
    • De-Emphasis: 50 uS
    • FM Deviation: ±50 kHz
    • Signal-to-Noise Ratio: 60 dB min.
    • Squelch: Receiver squelches (mutes) at 28 dB S/N ratio
    • Frequency Response: 25 Hz to 16 KHz, +1 dB, -3 dB, electrical response
    • Total Harmonic Distortion: Less than 1%, electrical response
    • Controls: ON/OFF/VOLUME: combination thumbwheel knob
    • Channel Selector: four-position rotary switch
    • Indicators: Red LED “ON” indicator, flashes to indicate Low battery
    • Audio Output Jacks: 3.5 mm stereo mini phone jack Accepts 3.5 mm mono or stereo phone plug
    • Audio Output Power: 15 mW max at 32 Ω
    • Acoustic Output: 125 dB SSPL90 with HED 021; 110 dB SSPL90 w/ EAR 013
    • Sensitivity: Better than 1 nW/cm2 for 40 dB signal-to-noise ratio
    • Approvals: CE, FCC, RoHS, WEEE
    • Warranty: 5 years on receiver, 90 days on accessories
    • Compatible Headphones/Earphones: Mono or stereo, 8-32 ohms, 3.5 mm mini phone plug, HED 021, HED 026, EAR 013, EAR 014, EAR 022, NKL 001
  • HED 027
    • Style: Heavy-duty, folding, mono headphones
    • Plug : 3.5mm mono
    • Cord: 39″
    • Driver Size: 40 mm
    • Nominal Impedance: 16Ω
    • Freq. Response: 20 – 20kHz
    • Weight: 102g
    • Max Power Input: 100 mW
    • Sensitivity: 96 dB @ 1kHz
    • Replacement Pads: EAR 035 (one pair)
  • NKL 001
    • Color: Black
    • Weight: 1.5 oz
    • Length: 18.5” cord
    • Connector: NKL 001: 3.5 mm mono plug NKL 001-S: 3.5 mm stereo plug with ring disconnected
    • Impedance: 8-16 Ohms
    • Input Power: 500 mW max
  • CHG 3502
    • Dimensions: 4-7/8″L x 3-7/8″”W x 2″H (12.4 cm L x 9.8 cm W x 5.1 cm)
    • Shipping Weight: 1.1 lbs (0.5 kg)
    • Enclosure: Black, ABS plastic
    • Charger Power
      • Input: 6 VDC, 300mA, Center Positive
      • Output: 100mA per bay
    • Power Supply: Williams Sound TFP 041 (US)
    • Input: 100-240 VAC, 50-60Hz, 0.5-0.3 A
    • Output: 6 VDC, 1.5 A.
    • Charging Time: 16 hours nominal*
    • Unit Capacity: 2 Units
    • Indicators: 2 Red LEDs – one for each bay. LEDs are lit when charging.
    • Warranty: 2-year
    • Approvals: CE, FCC, RoHS
  • BAT 026-2 NiMH, 1.2 Volt, 1500 mAh
  • IDP 00810-3/8" (L) x 6-¼" (W) x 1/8" (H)

In The Box

Customer Reviews