The VXH6 from Yamaha is a 6.5” pendant speaker offering wide dispersion for environments with a relatively low suspension height.
More about Yamaha's VXH Pendant Speakers
Functional, flexible, and fashionable, Yamaha’s VXH Series of pendant speakers are ideal for adding unprecedented acoustical quality to any architecture. Their elegant design blends seamlessly into a wide variety of installation environments, including entertainment facilities, retail buildings, gymnasiums, restaurants, and other large structures with high or sloped ceilings and wide, open spaces.
Choose from two models to adapt to your specific ceiling height: the VXH6 is a wide-dispersion, 6.5” speaker for relatively lower positioning, while the VXH8 is an 8” model that has narrower dispersion but higher power for higher suspension applications. Suspension hardware and wiring kits are included for easy, safe installation and height adjustment.
VXH supports both high- and low-impedance connections. Speaker wattage can be switched—even after installation. Adding to its versatility, VXH Series pendant speakers are paintable so they can be matched to any décor. They are IP45-rated for use in outdoor installations. (Note: It is not for use in humid environments.)
Yamaha VXH6 Features
- Wide dispersion (120°) and 300W power handling
- Engineered for optimum BGM and voice reproduction
- Pendant speaker suitable for high, open structure or sloped ceilings
- Direct support for low-impedance or high-impedance connections
- Paintable grilles with magnetic catches
- 2 x 6m steel wire cables by Gripple
- Black and white versions available
- 5.7 kg (12.6 lbs), Ø340 x D368 mm (Ø13-3/8” D14-1/2”)
- Single unit package
- VXH6 6.5" Pendant Speaker1
- Gripple Kit 1
- Euro Block (4 pin) 1
- Cushion Seal 1
- Back Cover Set 1
- Owner’s Manual 1
- GRIPPLE Kit Installation Guide 1
- Speaker TypeCoaxial 2 way, Bass reflex type
- Frequency Range (-10dB) 57 Hz – 20 kHz (Full-space:4π)
- Nominal Coverage120° conical (Full-space:4π)
- Crossover Frequencies3kHz
- Components
- LF: 6.5” (16 cm) Cone
- HF: 1” (2.5) Soft Dome
- Power Rating
- NOISE: 75W
- PGM: 150W
- PEAK: 300W
- Nominal Impedance8Ω
- Transformer Taps
- 100V: 60W, 30W, 15W
- 70V: 60W, 30W, 15W, 7.5W
- SPL
- Sensitivity (1W; 1m on axis): 93 dB (Full-space:4π)
- Peak (Calculated): 118 dB (Calculated, 1 m)
- I/O ConnectorsEuroblock (4 pin) × 1 (input: +/-, loop-thru: +/-): Min. wire size AWG 24 (0.2 sq), Max. wire size AWG 12 (3.5 sq)
- Protection Circuit (Load Protection)Full-range power limiting to protect network and transducers
- FinishVXH6B Black powder coating (approximate value: Munsell N3), VXH6W White powder coating (approximate value: Munsell N9.3)
- Dimensions
- Diameter: Ø341 mm (13 - 3/8")
- D: 379 mm (14 - 1/2")
- Net Weight5.7 kg
- Dust and Water ResistantIP45 (when waterproofing the cover hole)
- CertificationUL1480A, NFPA70, CE, RoHS
