The P10TR+425CL system includes a P10T dual channel transmitter, two P10R+ bodypack receivers, and two sets of SE425 earphones.
The P10T is a networkable, full-rack, dual channel wireless transmitter used in conjunction with the P10R Wireless Bodypack Receiver as part of the PSM®1000 Personal Monitor System. It offers a 72 MHz wide tuning bandwidth, networked remote control via Wireless Workbench® software, advanced rechargeability options, and PSM®900 backwards compatibility.
Shure's P10R+ is a low-profile, diversity bodypack receiver for use with the PSM® 1000 Personal Monitor System. The P10R+ twin-antenna diversity Bodypack Receiver brings personal monitoring to its highest level yet, putting category-leading audio quality, robust RF performance, and touring-grade features right at your fingertips.
Shure P10TR+425CL Features
- Full rack, dual-channel transmitter in a professional, touring grade chassis
- 72 MHz wide tuning range provides flexibility and performance in crowded, unpredictable RF environments
- Networkable over Ethernet connection to provide comprehensive frequency coordination and transmitter remote control via Wireless Workbench® software
- Backwards-compatible with PSM®900 receivers
- RF Mute Switch allows system setup without causing RF interference
- Sync RF scan information from a P10R bodypack quickly and easily over IR link
- Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
- Spectrum display provides a detailed frequency plot on the menu screen with selectable zoom
- Front panel audio input gain adjustment and LED level meter with clipping indicator
- Exceptional transmitter linearity vastly reduces frequency intermodulation, allowing more compatible channels per frequency range
- High-contrast LCD with grouped menu items provides an intuitive user interface
- Front or back mountable antennas
- Compatible with PA821B and PA821A antenna combiners
- Loop out connectors for multiple mix setups and easy installation
- Switchable +4dBu and -10 dBV input level
- Balanced, ¼" and XLR connectors
- 1/8" headphone out on the front panel for easy monitoring
What’s in the Box?
- P10T dual channel transmitter1
- P10R+ bodypack receivers2
- SE425 earphones2
- P10T
- RF Output Power Selectable: 10, 50, 100 mW (regionally dependent)
- RF Output Impedance: 50 Ω (typical)
- Net Weight: 10.4 lb (4.7 kg)
- Dimensions: 44 X 483 X 343 mm
- Power Requirement (RF on, 100 mW power mode, no audio)
- Input: 100-240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded)
- Output: 100-240V AC, 5A max, unswitched
- Audio Input
- Connector Type: Combination XLR and 6.35 mm (1/4”) TRS
- Polarity
- XLR: Non-inverting (pin 2 positive with respect to pin 3)
- 6.35 mm (1/4”) TRS: Tip positive with respect to ring
- Configuration: Electronically balanced
- Impedance: 70.2 kΩ (actual)
- Nominal Input Level
- Switchable: +4 dBu, –10 dBV
- Maximum Input Level
- +4 dBu: +29.2 dBu
- –10 dBV: +12.2 dBu
- Pin Assignments
- XLR: 1=ground, 2=hot, 3=cold
- 6.35 mm (1/4”) TRS: Tip=hot, Ring=cold, Sleeve=ground
- Phantom Power Protection: Up to 60 V DC
- Audio Output
- Connector Type: 6.35 mm (1/4”) TRS
- Configuration: Electronically balanced
- Impedance: Connected directly to inputs
- PT10R+
- Tri-band RF Filtering: –3 dB at 30.5 MHz from the center frequency of each band
- Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
- RF Sensitivity (20 dB SINAD): 2.2 μV
- Squelch Threshold: 22 dB SINAD (±3 dB), default setting
- Adjacent Channel Rejection: >70 dB
- Intermodulation Attenuation: >70 dB
- Blocking: >80 dB
- Image Rejection: >90 dB
- Audio Output Power (1kHz @ <1% distortion, peak power, @16Ω): 100 mW per output
- Minimum Load Impedance: 4 Ω
- Output Impedance: <1 Ω
- 4-Band Parametric EQ
- Low Shelf
- Selectable Gain: ±2 dB, ±4 dB, ±6 dB @100 Hz
- Low Mid
- Selectable Gain: ±2 dB, ±4 dB, ±6 dB @160 Hz, 250 Hz, 400 Hz, 500 Hz, 630 Hz
- Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
- High Mid
- Selectable Gain: ±2 dB, ±4 dB, ±6 dB @1 kHz, 1.6 kHz, 2.5 kHz, 4 kHz, 6.3 kHz
- Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5
- High Shelf
- Selectable Gain: ±2 dB, ±4 dB, ±6 dB @10 kHz
- Low Shelf
- Volume Limiter: Selectable: 0 dB to -48 dB in 3 dB steps
- Volume Lock (Limits volume adjustment knob; Selected value analogous to volume knob increment): Selectable: 0 dB to -70 dB
- Battery Life: 4–6 hours (continuous use) with AA batteries
- Net Weight: 158 g, without batteries
- Dimensions (H x W x D): 3.9 x 2.6 x 0.9 inches (99 x 66 x 23 mm)
- SE425
- Transducer Type: Dual balanced-armature drivers
- Sensitivity at 1 kHz: 109 dB SPL/MW
- Impedance at 1 kHz: 22 Ω
- Frequency Range: 20 Hz –19 kHz SE315 22 Hz –18 .5 kHz
- Input Connector: Gold-plated 3.5 mm (1/8”) stereo mini jack plug with 6.35 mm (1/4”) threaded adapter
- Net Weight: 1 oz (30 g)
- Operating Temperature: -18°C to 57°C (0°F to 135°F)
- Storage Temperature: -29°C to 74°C (-20°F to 165°F)
GEAR YOU NEEDfrom 400+ Brands
SAME DAY SHIPPINGon in stock items
EXPERT ADVICEfrom knowledgeable Account Managers
