Audio-Technica ES8766RC 5-Pin Desk Stand Power Module

Call a Sales Pro at 800.203.5611 for more details!

The ES8766RC desk stand power module works with ES925 goosenecks and microphone elements. The desk stand features a 5-pin TB5M-type output connector, heavy die-cast construction, and no-slip bottom pads to minimize coupling of surface vibration to the microphone. It is equipped with a touch-sensitive capacitive-type user switch with local and remote switching options. Locally, it can be set to any one of three operating modes: touch-on/touch-off, touch-to-talk and touch-to-mute. For enhanced control in conference and boardroom installations, the unit's external contact closure allows you to trigger an external device, such as a camera or the lighting, from the switch. The desk stand is also equipped with a highly visible, two-state RGB LED status indicator and a UniSteep® filter that provides steep low-frequency attenuation to improve sound pickup without affecting vocal reproduction quality.

Audio-Technica ES8766RC Features

• 5-pin desk stand power module for use with ES925 goosenecks and microphone elements
• Logic I/O capability permits control of remote devices from the desk stand's touch-sensitive capacitive-type user switch
• Capacitive touch switch can be set to any one of three operating modes: touch-on/touch-off, touch-to-talk, and touch-to-mute
• Equipped with highly visible, two-state RGB LED status indicator
• Integral UniSteep® filter provides steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Heavy die-cast construction and no-slip bottom pads minimize coupling of surface vibration to the microphone

• ES8766RC 5-Pin Desk Stand Power Module1
• 7.6 m (24.9') microphone cable (TA5F, unterminated)1
• M2 screws 2
• Hex wrench1

• Low-Frequency Roll-Off80 Hz, 18 dB/octave
• Impedance130 ohms
• SwitchesActivation: on/off
• LED Colormic on, mic off
• Switch functiontouch on/off, momentary on, momentary off
• Controllocal, remote, LED remote
• Low cuton/off
• Phantom Power Requirements22-52V DC
• Contact ClosureClosure input voltage: -0.5 to 5.5V
• Maximum permissible power200 mW
• On-resistance100 ohms
• LED controlActive high (+5V DC) TTL compatible <
• Active low voltage1.2V or lower
• Maximum permissible input power -0.5 to 5.5V
• Maximum permissible power200 mW
• Weight640 g (22.6 oz)
• Dimensions97 mm (3.82") W x 130 mm (5.12") D x 33 mm (1.3") H
• Output ConnectorTB5M-type