The Benro BV10 tripod kit supports up to 22 lbs. making it a perfect match for studio applications and larger fully rigged video cameras. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. The 5- step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan & tilt movements make sure your movements are smooth and steady. One 3/8" accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV10 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 100mm metal ball. The eighth generation two stage aluminum tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads, ideal for supporting jibs and fully rigged cameras.
Benro A674TMM Features
- Supports up to 22 lbs.
- A perfect match for studio applications and larger fully rigged video cameras
- 5- step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up
- 4 step pan & tilt movements make sure your movements are smooth and steady.
- 3/8" accessory mount for adding a simple audio recorder or monitor
- Removable tie down stud is converts the BV10 head to flat base mode for mounting to a slider
- 100mm metal ball
- Two stage aluminum tripod
- A674TMM Dual Stage AL Video Tripod1
- BV10 Head Video Head1
- QR Plate1
- Mid Level Spreader1
- Deluxe Carry Case1
- Strap1
- Rubber Feet4
- Tool kit1
- Three Year Warranty (+2 with online registration)1
- Back Tilt Range -65°
- Base Mount Thread 3/8"-16
- Bowl Size 100mm
- Closed Length 34.64” (88cm)
- Converts to Monopod No
- Counterbalance 4 Steps (0-3)
- Foot Mount Fixed Spike
- Foot Type Rubber Pivot
- Forward Tilt Range +90°
- Independent Leg Spread Mid Level Spreader
- Leg Diameter 1 22mm
- Leg Diameter 2 16mm
- Leg Diameter 3 16mm
- Leg Lock Type Twist Lever Lock
- Leg Material Aluminum
- Leg Sections Dual Stage
- Maximum Height 64.56” (164cm)
- Maximum Payload Capacity 22.04lbs (10kg)
- Minimum Height 29.13” (74cm)
- Pan Drag Stepped (0-3)
- Pan Lock Y
- Panning Range 360
- Product Length 34.64” (88cm)
- Product Weight 16.04lbs (7.28kg)
- Quick Release Type Slide-In Video (QR13)
- Tilt Drag Stepped (0-3)
- Tilt Lock Y
- Top Plate Diameter (mm) 60
- Product Height 38.6” (98cm)
- Product Width 9.4” (23.9cm)
