Electro-Voice EVC-1152 15-Inch Passive Speaker

EVC loudspeakers from Electro-Voice are two-way systems that can be used in a broad range of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, cost-effective package. EVC loudspeakers are voiced to complement other EV-Innovation models (EVF, EVH, EVA, and EVU).

The EVC-1152 from Electro-Voice is a 15” two-way passive speaker that can be used in a broad range of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, versatile, and cost-effective package. The high frequency section of EVC loudspeakers comprises a single 1¼-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a modified fourth-order design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range.

Electro-Voice Speaker Features

• 15-inch, two-way loudspeaker, with rotatable waveguide
• Power rating: 350 W Continuous, (1400 W Peak)
• Passive system: 98 dB, 129 dB maximum
• Gland nut cover and stainless steel grille on PI versions
• Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end over 70V/100V lines

In the Box

• 1x EVC-1152 15" 2-Way Passive Speaker

Product Specifications

• Max Calculated SPL: 129dB
• Frequency Range (-10 dB): 50Hz-25kHz
• Suspension: Eight (8) M10 Suspension Points, optional U Bracket or pan/tilt wall mount
• Minimum Impedance: 6.7Ω
• HF Transducer: DH-3
• Frequency Response (-3 dB): 70Hz-21kHz
• LF Transducer: EVS-15M
• Grille: 18 GA cold-rolled steel with rotatable logo (18 GA stainless steel with hydrophobic cloth on PI models)
• Environmental Specs: IEC 60529, IP44 (IP55 for PI versions)
• Nominal Impedance: 8Ω
• Axial Sensitivity (SPL, 1 W @ 1 m): 98dB
• Power Handling (Continuous / Peak): 350/700/1400W
• Connectors: Dual four-pin 10 AWG (6 mm) Phoenix/Euro Block screw-terminals
• Enclosure: 15mm weather-resistant plywood with EV Coat
• Color: Black or White
• Passive crossover frequency: 1.6kHz
• Rec. high-pass frequency, 4th Order: 40 Hz for 8Ω (50 Hz with TK-150 transformer)