null Skip to main content
Shure MXWANI4 Audio Network Interface
Shure MXWANI4 Audio Network Interface
$1,306.00

Shure MXWANI4 Audio Network Interface

(No reviews yet)
SoundPro Item: 23609
MPN: MXWANI4
MSRP: $1,828.00
$1,306.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

Audio network interface streamlines Microflex Wireless connectivity to conference room AV systems over 4 channels to enable easy system set-up. Features include corporate uplink mode and Dante networking to transport low-latency digital audio.

Shure MXWANI4 Features

  • Analog connections: 4 block connector channel outputs, with 1 block connector inputs
  • Four port gigabit switch: Optimized port configurations for connection to the Access Point Transceiver and Networked Charging Stations, third party control systems, and corporate networks
  • Ethernet connectivity: Send audio and control signals over long cable runs of up to 300 feet or anywhere over a corporate network
  • Power over Ethernet: Port 1 of the rear panel switch supplies power over Ethernet to the Access Point Transceiver for simplified installation
  • Corporate uplink mode: Link to the corporate network for remote control of system settings while keeping audio off the network for security and to reduce bandwidth
  • Front panel controls: Mute or solo channels and set input/output levels easily from the front panel
  • PC/Mac software control: Access the Microflex Wireless Control Software from a networked computer for input/output levels and port configuration
  • Dante™ networking: Transports low latency digital audio received from wireless microphones over Ethernet to any other Dante-equipped device
  • Headphone output: Solo audio signal on any channel
  • MXWANI4 Audio Network Interface1
  • Audio Frequency Response20 Hz to 20 kHz (+1, −1.5 dB)
  • Dynamic Range (20 Hz to 20 kHz, A-weighted, typical)
    • Analog-to-Dante: 113 dB
    • Dante-to-Analog: 110 dB
  • Output Noise (20 Hz to 20 kHz, A-Weighted, typical)
    • Line: −84.5 dBV
    • Aux: −95.2 dBV
    • Mic: −106.5 dBV
  • THD+N (20 Hz to 20 kHz@ +4dBu analog input, −10 dBFS digital input)<0.05%
  • Polarity Non-inverting, any input to any output
  • Dimensions (H × W × D)1.7 × 19 × 14.4 inches (44 mm × 483 mm × 366 mm)
  • Weight
    • MXWANI4: 6.9 lbs (3.1 kg)
    • MXWANI8: 7.1 lbs (3.2 kg)
  • HousingSteel; Extruded aluminum
  • Power Requirements100 to 240 V AC, 50–60 Hz, 1 A
  • Operating Temperature Range−18°C (0°F) to 63°C (145°F)
  • Storage Temperature Range−29°C (-20°F) to 74°C (165°F)
  • Analog Connections: Outputs
    • Configuration Active Balanced
    • Impedance 310 Ω
    • Clipping Level (minimum)
      • Line: +26.2 dBV
      • Aux: +16.2 dBV
      • Mic: −3.8 dBV
  • Analog Connections: Inputs
    • Configuration Active Balanced
    • Impedance 10.6 kΩ
    • Clipping Level (minimum) Line: +23.8 dBV
    • Aux: +10.8 dBV
    • Headphone Output
      • 6.35 mm (1/4") TRS, 100 mW, 350 Ω, dual mono (will drive stereo phones)
      • 0 dBV=1 V RMS 0 dBu=0.775 V RMS 0 dBV=2.2 dBu
  • Digital Signal Processing
    • AD/DA Converter: 24-bit, 48 kHz
    • Latency (Estimated Nominal, ±0.1 ms)
    • Analog-to-Dante: 0.21 ms
    • Dante-to-Analog: 0.24 ms + TN
    • TN = Network latency in milliseconds, as set in Dante Controller.
    • Note: Dante network latency is typically associated with the receiving device.
  • Networking
    • Network Interface: Four-Port Gigabit Ethernet Switch, Dante digital audio
    • Uplink Port (Port 4): Selectable, blocks multicast traffic
    • Power over Ethernet (PoE): Provided on Port 1 to power MXWAPT
    • Cable Requirements: Cat 5e or higher, shielded, 100 m maximum between network devices
    • Network Addressing Capability: DHCP, link-local, static

In The Box

Videos Hide Videos Show Videos

Customer Reviews