Skip to main content
Radial Trim-Two Passive Stereo Direct Box with Level Control
Radial Trim-Two Passive Stereo Direct Box with Level Control

Radial Trim-Two Passive Stereo Direct Box with Level Control

SoundPro Item: 26437
MSRP: $240.00
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The Trim-Two™ is a passive stereo direct box designed for use with laptop computers and other consumer playback devices, eliminating hum and buzz from ground loops while providing an easy-access level control for quick adjustments on stage.

The Trim-Two allows you to connect any playback device and interface it with balanced pro audio equipment without signal loss or hum and buzz from ground loops. It features two transformers which isolate and balance the audio output from your source device, eliminating noise and allowing you to use long cable runs without signal degradation. A handy mono sum switch makes it easy to reduce the output channel count or send the same signal to two destinations at once, and an accessible level control gives you the ability to adjust levels in an instant. Multiple input connector types make it easy to hook up any consumer line level playback source, from laptops & smartphones to DJ equipment. The completely passive design means that you never have to worry about powering the Trim-Two, making it truly plug & play.

Radial Trim-Two Features

  • Stereo direct box for line level sources
  • Passive signal path with transformer isolation
  • Eliminates hum and buzz when connecting to the PA
  • Level control & mono sum switch
  • Trim-Two passive stereo direct box with level control1
  • Audio Circuit Typepassive transformer isolated
  • Frequency Response20Hz to 20,000Hz (-1/+3dB)
  • THD+N0.009% (1kHz with 100k load); 0.006% (-5dBu input)
  • Dynamic Range>126 dB (difference between noise floor and max. output)
  • Input Impedanceapprox. 10k with 100k load (depends on load impedance; about 6k with mono mode)
  • Max. Input> +20dBu
  • Gain-1 dB (10k load; level control at max.)
  • Clip Level - Output> +11dBu
  • Output Impedance2800Ω (level control at max; higher at lower settings)
  • Noise Floor< -115 dBu
  • Intermodulation Distortionextension (-10dBu input)
  • Phase Deviation<10° (20Hz to 20kHz with 100k load)
  • Input Padvariable trim control
  • XLR ConfigurationPin-1 ground; pin-2 hot (+); pin-3 cold (-)
  • Other Connectors1/4” TRS, RCA and Mini Phone In
  • Powernone, passive
  • Constructionsteel enclosure
  • Dimensions (LxWxD)5" x 3.3" x 1.8"
  • Weight1.55 pounds

In The Box

Customer Reviews