UP 2082 is a device with 2 separated and independent 80W amplifiers, each having 2 audio inputs, of which one with priority function through a closing contact.
RCF UP2082 Features
- Power Amplifier designed for the transmission of announcements and / or musical programs
- Main input on removable connector
- AUX Input for music sources removable connector
- Controls for treble, bass and Gain on the AUX Input
- Main Input can have priority over the Aux Input (by means of an external command linked to the removable connector)
- Output speaker available either for low impedance loudspeakers (min. 4 O) or 100 – 70 V constant voltage line
- Front panel LEDs indicate the device state (ON, PROT), the priority activation (PRIOR) and the signal/peak level (SIG/PK)
- UP2082 Power Amplifier1
- Amplifier specifications
- Number of Channels: 2
- Power Output Channel (@ 4 OHM): 80W RMS
- Power Output (HI-Z): 80W RMS
- Frequency Response (-3DB): 50Hz ÷ 16Hz
- Signal/Noise Rate (”A” Weighted): >80 dB
- Distortion (THD+N) @ 1kHz Nominal Power: <0.3 %
- Input section
- Balanced: 4
- General Purpose Inputs (GPI): 4
- Line Connectors: Euroblock
- Line Inputs: 4
- Mono: 2
- Stereo: 2
- Total Number of Inputs: 4
- Output section
- Power Output Connectors: Euroblock
- Processing
- Tone Controls: Yes
- Controls
- Configuration: Front panel
- Priority: Yes
- Protections
- Cooling: Convection
- Short Circuit: Yes
- Thermal: Yes
- DC Delay: Yes
- Fuses: Yes
- Power requirement
- Operating Voltage: 220-240/115V~ 50/60Hz
- Voltage Selection: Internal
- Power Consumption: 320W
- Standard compliance
- CE Marking: Yes
- Physical specifications
- Cabinet/Case Material: Metal
- Color: Black
- Rack Mounting: 19", 2U
- Dimensions (DxHxW): 9.06 x 3.46 x 17.4 inches (230 x 88 x 442mm)
- Weight: 11.51 lbs (5.22 kg)
- Shipping informations
- Package Dimensions (DxHxW): 19.69 x 7.87 x 12.99 inches (500 x 200 x 330mm)
- Package Weight: 14.95 lbs (6.78 kg)
