RCF UP8502 Power Amplifier

The full digital technology used in these new products allows extremely high efficiency both with AC and DC power supply operation, Pro-Quality audio reproduction and compactness: all the three models are built-in a single 19” Unit.
The switching mode power supplies include an independent DC 48 V section that guarantees extra redundancy to the possible failure of the units. Each channel is provided with two inputs and dedicated priority circuit to get mix/mute and exclusive priority operation. The amplifiers are suitable for 70/100 V applications, using a unique RCF technology that allows to eliminate the line output transformer. Several status LEDs on front panel give a complete feedback on amplifier status, a DIP switch on rear panel allows to disable the frontal volume controls in order to avoid misuses. All connectors are removable screw terminals.

RCF UP8502 Features

• Class D amplifier and double switching AC-DC power supply, transformer-less galvanic insulated speaker output
• Pro audio performance
• Selectable 70 – 100 V output per channel
• Double input per channel
• Active full protections on amplifier and power supply
• Stand-by, priority and fault remote commands
• Activity and status indicators
• Volume knobs on front panel with disablement facility
• Light-weight 1 U 19" rack enclosure

• UP8502 Power Amplifier1

• Amplifier specifications
  • Amplifier Class: D
  • Number of Channels: 2
  • Power Output (HI-Z): 500W RMS
  • Frequency Response (-3DB): 40Hz ÷ 16Hz
  • Signal/Noise Rate (”A” Weighted): >86 dB
  • Crosstalk (@ 1kHz): <70 dB
  • Distortion (THD+N) @ 1kHz Nominal Power: <0.3%
• Input section
  • Balanced: 4
  • Genearl Purpose Inputs (GPI): 4
  • Line Connectors: Euroblock
  • Line Inputs: 4
  • Mono: 2
  • Stereo: 2
  • Total Number of Inputs: 4
• Output section
  • Power Output Connectors: Euroblock
  • Genearl Purpose Outputs (GPO): 1
• Controls
  • Configuration: DIP switch, Front panel
  • Priority: Yes
• Protections
  • Cooling: Forced
  • Short Circuit: Yes
  • Thermal: Yes
  • DC Delay: Yes
  • Fuses: Yes
• Power requirement
  • Operating Voltage: 220-240/115V~ 50/60HzV ~ Hz
  • Voltage Selection: Internal
  • DC Power: Yes
  • DC Power Value: 48V
  • Power Consumption: 800W
• Standard compliance
  • CE Marking: Yes
  • EN54-16 Certified: Yes
  • CPR Number: 1438-CPR-0241
• Physical specifications
  • Cabinet/Case Material: Metal
  • Color: Black
  • RAck Mounting: 19", 1U
  • Dimensions (DxHxW): 14.76 x 1.73 x 18.98 inches (375 x 44 x 482mm)
  • Weight: 11.46 lbs (5.2kg)
• Shipping
  • Package Dimensions (DxHxW): 18.9 x 7.09 x 21.65 inches (480 x 180 x 550mm)
  • Package Weight: 15.87 lbs (7.2 kg)