null Skip to main content
Decimator DR1-10B1G General Purpose Connector Rear
Decimator DR1-10B1G General Purpose Connector Rear
$50.00

Decimator DR1-10B1G General Purpose Connector Rear

(No reviews yet)
SoundPro Item: 35218
MPN: DR1-10B1G
$50.00
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The Decimator DR1-10B1G General Purpose Connector Rear features 10 x BNC and General Purpose Connector Rear.

For use with the following openGear cards:

Decimator DR1-10BIG Features

  • Supports 3G level A and B on inputs and output, allowing conversion between 3G level A and B
  • Low cost miniature (3G/HD/SD)-SDI 1 to 9 MultiViewer or 9 to 1 input multiplexer
  • Custom Layouts with various standard layouts
  • 16 Character UMD overlay per window with individual enables, custom positioning and size
  • 16 Channel Audio Metering overlay per window with individual enables, custom positioning and size
  • Safe Action and Safe Title overlay per window with individual enables and adjustment
  • Centre Cross overlay per window with individual enable
  • Audio ID overlay
  • 3 pin connector on the DR1-10B1G rear module allows for Dynamic UMD and Tallies via RS422/485 using the industry standard TSL protocol
  • Tallies can be applied to either Tally Boxes (Default), Outside Safe Action Area or Border
  • Tally boxes allows for up to 4 Tallies per window
  • Fast switching between inputs using Full-Screen scaling
  • Selectable output format in both Full-Screen MultiViewer mode
  • Low latency buffering for each input allowing non-synchronous inputs
  • 9 x (3G/HD/SD)-SDI inputs with auto detection (29 Formats supported in total)
  • Each quadrant is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
  • Variable aspect ratios per quadrant
  • In Pass-Through mode the selected input is passed through to both the (3G/HD/SD)-SDI outputs
  • USB Mini B port for control and firmware updates
  • Supports openGear DashBoard for control
  • The DR1-10B1G rear is sold seperately and has 10 BNC connectors and a 3 pin connector for RS422/485
  • DR-10BIG general purpose connector rear1
  • SDI Input Formats
    • 3G: SMPTE 424M@2.97 and 2.967Gb/s
      • 1080p@60/59.94/50Hz
    • HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s
      • 1080i@60/59.94/50Hz
      • 1080p/psf@30/29.97/25/24/23.98Hz
      • 720p@60/59.94/50/30/29.97/25/24/23.98Hz
    • SD:SMPTE 259M@270Mb/s
      • 625i50 (PAL)
      • 525i59.94 (NTSC)
  • LED Status
    • Power / Update
    • 9x Signal lock and rate
  • Inputs
    • 9 x (3G/HD/SD) - SDI
    • USB Mini B for control and updates
    • 3-pin connector for UMD and Tallies via RS422/485
  • Outputs1x SDI (3G/HD/SD)-SDI

In The Box

Customer Reviews