null Skip to main content
Dynacord PowerMate 1000-3 10-Channel Powered Mixer
Dynacord PowerMate 1000-3 10-Channel Powered Mixer
$4,613.84

Dynacord PowerMate 1000-3 10-Channel Powered Mixer

(No reviews yet)
SoundPro Item: 36506
MPN: DC-PM1000-3-UNIV
MSRP: $4,708.00
$4,613.84
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The Dynacord PowerMate 1000-3 10-Channel Powered Mixer features a mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier.

The PowerMate incorporates no less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is of the highest quality as you would expect from a stand-alone device. The PowerMate is a real all-rounder for almost all applications with maximum feature set at minimum size.

The mixing section starts with 10 lowest noise, discrete microphone preamps. 6 auxiliary busses, two of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate-reverbs. Further, each preset can be edited and stored to 20 User memories.

The built in USB audio interface shares 4 playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package.

The 11 band stereo graphic equalizer can be routed flexible to master or monitor channels.

The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class-D output stage, it’s very efficient and lightweight, too. An optional speaker protection allows limitation of long-term power without giving up dynamics.

Finally, the slim housing is protected by a rugged plastic lid, hold by strong snap in magnets.

Dynacord PowerMate 1000-3 Features

  • Intuitive mixer with 10 input channels (6 Mic/Line + 4 Mic/Stereo-Line)
  • Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
  • 2 high-quality editable effects, 100 factory and 20 user presets
  • Professional 4x4 24-bit / 96 kHz USB interface with MIDI
  • PowerMate 1000-3 10-channel powered mixer1
  • Mains cord1
  • Channels (mono + stereo)6 + 4
  • Auxilarys (MON, FX, AUX)2 Pre, 2 Post, 2 Pre/Post switchable
  • Max. Single Channel Output Power, Dynamic Headroom, IHF-A
    • Into 2.66Ω: 2 x 1600W
    • Into 4Ω: 2 x 1250W
    • Into 8Ω: 2 x 675W
  • Max. Single Channel Output Power, Continuous, 1kHz, THD=1%
    • Into 2.66Ω: 2 x 1350W
    • Into 4Ω: 2 x 1150W
    • Into 8Ω: 2 x 650W
  • Max. Midband Output Power, 1kHz, THD=1%, Dual Channel
    • Into 2.66Ω: 2 x 1350W
    • Into 4Ω: 2 x 1000W
    • Into 8Ω: 2 x 600W
  • Rated Output Power, 20Hz to 20kHz, THD<0.5%, Single Channel
    • Into 4Ω: 2 x 900W
    • Into 8Ω: 2 x 450W
  • Max. Output Voltage, of Power Amplifier, 1kHz, No Load74 Vrms
  • THD, at 1kHz, MBW=80kHz
    • Mic Input to Master A L/R Outputs, +16dBu, Typical: <0.005%
    • Power Amp Inputs to Speaker L/R Outputs: <0.075%
  • DIM 30, Power Amplifier, 3.15kHz, 15kHz<0.05%
  • IMD-SMPTE, Power Amplifier, 60Hz, 7kHz<0.15%
  • Frequency Response, -3dB, ref. 1kHz
    • Any Input to Any Mixer Output: 15Hz to 70kHz
    • Any Input to Speaker L/R Output: 20Hz to 30kHz
  • Crosstalk, 1kHz
    • Amplifier L/R: <-85dB
    • Channel to Channel: <-80dB
    • Mute and Standby Switch Attenuation: >100dB
    • Fader and FX/AUX/MON Send Attenuation: >85dB
  • CMRR, Mic Input, 1kHz>80dB
  • Input Sensitivity (all level controls in max. position)
    • Mic: -74 dBu (155 µV)
    • Line (mono): -54 dBu (1.55 mV)
    • Line (stereo): -34 dBu (15.5 mV)
    • CD (stereo): -34 dBu (15.5 mV)
    • Power Amp Inputs: +8 dBu (1.95 V)
  • Max. Level, Mixing Desk
    • Mic Inputs: +21dBu
    • Mono Line Inputs: +41dBu
    • Stereo Line Inputs: +30dBu
    • All Other Inputs: +22dBu
    • All Other Outputs: +22dBu
  • Input Impedances
    • Mic: 2kΩ
    • Insert Return: 3.3kΩ
    • 2Track Return & CD In: 10kΩ
    • All Other Inputs: > 15kΩ
  • Output Impedances
    • Phones: 47Ω
    • All Other Outputs: 75Ω
  • EIN, Mic Input, A-weighted, 150Ω-130dBu
  • Noise, Channel Inputs to Master A L/R Outputs, A-weighted
    • Master Fader Down: -97dBu
    • Master Fader 0dB, Channel Fader Down: -91dBu
    • Master Fader 0dB, Channel Fader 0dB, Channel Gain Unity: -83dBu
  • Signal/Noise Ratio, Power Amplifier, A-weighted, 4Ω105dB
  • Output Stage Topology, AmplifierClass D
  • Equalization
    • Lo Shelving: ±15dB / 60Hz
    • Mid Peaking, Mono Inputs: ±15dB / 100Hz to 8kHz
    • Mid Peaking, Stereo Inputs: ±12dB / 2.4kHz
    • Hi Shelving: ±15dB / 12kHz
    • Master EQ 11-Band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12k Hz): ±10dB/Q=1.5 to 2.5
  • Filter
    • Lo-Cut, Mono Inputs: f=80Hz, 18dB/oct
    • Voice Filter, Mono Inputs: switchable
    • Feedback Filter, Mon 1/2: 70 Hz to 7 kHz, Notch, -9 dB
    • Speaker Processing: LPN, switchable
  • Effects
    • Type: dual stereo 24/48-bit multi effects processors
    • Effects Presets: 100 factory + 20 user, tap-delay
    • Remote Control: footswitch, MIDI
  • Display128 x 64 pixels, OLED
  • Digital Audio Interface
    • Channels: 4 in / 4 out
    • AD/DA Conversion: 24-bit
    • Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz
    • PC Interface: USB2.0, Female Type B
    • Peak Display: 6dB before clip
  • MIDI Interface5-pin DIN connector, in/out
  • Output Power Control (speaker protection)adjustable longterm RMS limiter
  • Protection
    • Mixer Outputs (relay controlled): MON 1, MON 2, MASTER A
    • Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF
    • Switching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
  • Coolingcontinuous speed controlled fans
  • Phantom Power (switchable in groups)48 V DC
  • Power Requirements (SMPS with auto range mains input)100V to 240V AC, 50Hz to 60Hz
  • Power Consumption450W (at 1/8 max. output power, 4Ω)
  • Dimensions (WxHxD)20.09" x 6.48" x 22.5"
  • Weight27.56 pounds

In The Box

Videos Hide Videos Show Videos

Customer Reviews