null Skip to main content
Clear-Com CZ-BS410 BS410 Base
Clear-Com BS410 DX410 2.4GHz Base Station
$5,385.00

Clear-Com BS410 DX410 2.4GHz Base Station

(No reviews yet)
SoundPro Item: 42553
MPN: CZ-BS410
$5,385.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.

Clear-Com CZ-BS410 Features

  • Two-channels
  • 7kHz wideband audio
  • 2-wire and 4-wire bridging
  • 2-wire auto-nulling
  • Lost packet concealment
  • Upgraded radio
  • Supports up to 15 beltpacks and/or wireless headsets
  • BS410 DX410 2.4GHz Base Station1
  • Audio
    • Channels: 2 audio channels
    • Capacity: Up to 15 BP410 and/or WH410 per base station
    • Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex.
    • Radio Frequency Range: 2400 – 2483.5 MHz
    • Audio Frequency: 200 Hz – 7kHz
    • 4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
    • 2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical
    • Aux Input: XLR-3F with ¼” (6.35mm) combo jack, 600 Ohms balanced, level adjustable
    • Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
    • Headset Connector: 4-pin mini-DIN, Electret microphone
    • Headset Output: 200mW into 32 Ohms
    • Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
    • System Distortion: <2%
    • Communication Security: dual-slot diversity
  • Transmitter
    • Type: Frequency Hopping, Spread Spectrum (FHSS)
    • Transmit Power: 100mW burst
    • Modulation Type: Gaussian filtered FSK, TDMA
    • Frequency Stability: 13 ppm
    • Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature
  • Receiver
    • Type: Frequency Hopping, Spread Spectrum (FHSS)
    • RF Sensitivity: <-90dBm w 10-3 BER
    • Frequency Stability: 13 ppm
    • Distortion: <2%
  • Power Requirements100 – 240V AC, 50 – 60Hz or 12 – 14V DC
  • EnvironmentalTemperature: +32° – +122°F (0° – +50°C)
  • Dimensions (HxWxD)1.75x19x17.13" (44x483x435mm)
  • Weight9 lbs (4.1kg)

In The Box

Customer Reviews