null Skip to main content
Electro-Voice EVID FM 4.2 4'' 2-Way Flush-Mount Speaker (Pair)
Electro-Voice EVID FM 4.2 4-Inch Install Speakers (Pair)
$515.00

Electro-Voice EVID FM 4.2 4-Inch Install Speakers (Pair)

(No reviews yet)
SoundPro Item: 45512
MPN: FM4.2
$515.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The EVID FM4.2 flush-mounted loudspeaker system from Electro-Voice is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 4 inch two-way loudspeaker coupled with a 4 inch passive radiator and an internal line-matching transformer. The loudspeaker features 4 inch low-frequency cone and high-temperature voice-coil assembly along with a 4 inch long excursion passive radiator and titanium coated dome tweeter. The EVID FM4.2 loudspeaker utilizes a crossover network, centered at 3,600 Hz, that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition the EVID FM4.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels.

The EVID FM4.2 utilizes a transformer that offers a selection of 1.75, 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch.

The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS. The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was optimized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4 inch deep providing an easy installation into nearly any tight wall or ceiling space. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers. FM4.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.

Electro-Voice EVID FM 4.2 Features

  • Shallow profile, ideal for tight wall or ceiling spaces
  • Tuned passive radiator extends bass, enhances performance
  • High quality 1-inch titanium dome tweeter
  • Full-bandwidth overload protection
  • 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility
  • Front-panel mode/wattage switch
  • Fully-sealed enclosure provides superior isolation to protect adjacent rooms
  • Secure Phoenix-style pass-through connectors for easy wiring and installation.
  • Four point "quick mounting" tabs for fast attachment in any wall cavity
  • Can-mounted transformer for enhanced rigidity
  • Ribbed back can eliminates flexing
  • EVID FM 4.2 4" 2-way flush-mount speaker2
  • Cutout template1
  • Paint template2
  • Frequency Response (-3 dB)70Hz - 20,000Hz
  • Frequency Range (-10 dB)52Hz - 20,000Hz
  • Sensitivity87 dB (SPL 1W/1m)
  • Max. SPL110 dB
  • Coverage150°
  • Impedance8 Ω nominal (transformer bypass)
  • Crossover Frequency3.6 kHz
  • Rec. Highpass Frequency70 Hz
  • Power Handling50W cont. prog. / 200W peak
  • HF Transducer1"
  • LF Transducer4", passive radiator 4"
  • Transformer Taps
    • 70V: 1.75, 3.75, 7.5, 15, or 30W
    • 100V: 3.75, 7.5, 15, or 30W
    • Bypass: 8Ω nominal
  • Connectors4 pin phoenix style terminals
  • Enclosure Material
    • Baffle: UL 94V-O rated ABS
    • Backcan: zinc plated steel
  • Grilleperforated powdercoated steel with safety tether
  • Mounting Systemintegrated toggle anchors
  • Support Hardwarecutout template, paint shield
  • Dimensions13.77" x 7.42" x 3.8"
  • Weight6.5 pounds

In The Box

Customer Reviews