![Lowell RPAK-810-72 8'' Dual Cone](https://cdn11.bigcommerce.com/s-mmffu4sg6a/images/stencil/50x50/products/3365/5656/rpak81072__33402.1639070083.jpg?c=1")
For general purpose paging and distributed music, the RPAK ceiling speaker kit includes two each: 8 in. 15W dual cone driver (No. 810), factory wired transformer (No. TLM572), steel backbox (No. 8XD4), white grille (No. WB8), and T-bridge (No. LBS8R1).
Lowell RPAK-810-72 Features
- Certified U.S. steel
- Made in the U.S.A. with global components
- Drivers (No. 810) are 8" 15W dual cone with 10 oz. magnet, 54Hz–11.6kHz (±6dB) and 50Hz–20kHz (±6.6dB) frequency response, 97.9dB average sensitivity measured 1W/1M
- Dual voltage transofmers are 25V/70V transformers with primary taps at .25, .5, 1, 2 and 5W
- White steel grilles, one factory mounted to driver with welded studs the other installs to enclosure and T-bridge with 4 white screws
- White enclosures (10" diameter x 4" depth) are heavy gauge steel with acoustic pad and four 1/2 - 3/4 in. knockouts for conduit; punched lip for screw-mount installation of T-bridge (does not include 8-32 screws to mount enclosure to tile bridge)
- Tile bridges (23.75" long) are included to transfer weight to ceiling support structure in suspended tile ceilings; 4 wire-tie holes for seismic anchoring
- RPAK-810-72 8'' Dual Cone2
- Drivers (No. 810)2
- Dual-Voltage Transformers2
- White Steel Grilles (No. WB-82
- White Screws4
- Enclosures (No. 8XD4)2
- Tile-Bridges (No. LBS8-R1)2
- Model No.RPAK- 810-72
- RMS power rating15W
- Frequency response 51Hz-11.6kHz (±6dB) and 50Hz-20kHz (±6.6dB)
- Sensitivity 97.9dB average measured 1W/1M
- Transformer 25V/70V with primary taps at .25, .5, 1, 2, and 5W
- GrilleSteel with white powder epoxy finish
- Enclosure10 inches diameter x 4 inches deep with 1/2–3/4 in. knockouts for conduit and a white powder epoxy finish
- Tile-bridges 23.75 inches long galvanized steel with holes for seismic anchoring
