[DISCONTINUED] Marshall VS-102-HDI 2.0 MP Encoder/Decoder

The Marshall VS-102-HDI is a High Definition Video Server that allows real-time transmission of HDMI or NTSC/PAL composite video signal along with bi-directional AAC encoded high definition stereo audio over standard IP networks and the internet. The Marshall VS-102-HDI incorporates advanced H.264 and MJPEG compression technology. This allows 50% more compression capacity over an existing IP Network, while providing optimal video transmission quality even in networks with limited bandwidth.

The VS-102-HDI may be configured to operate as a Point-to-Point talent monitoring system. For example, the unit can operate as an encoder to compress and transmit A/V data over a LAN to another VS-102-HDI located in a Green Room or other location. The other unit can act as a decoder which receives the compressed data through the LAN and restores the data to its' original high definition state. Additionally, other computers or VS-102-HDI decoders connected to the same network can monitor both the audio and video in multiple locations throughout a venue such as dressing rooms, stage manager, or box office at the same time. When properly configured, the VS-102-HDI may be simultaneously monitored through the internet.

Marshall VS-102-HDI Features

• High quality AV encoder / decoder (selectable)
• Full HD resolution 1080p encoding / decoding
• Up to 30fps @ 1920 x 1080 streaming
• H.264/H.264 & H.264/MJPEG dual streaming
• 2-way audio communication
• Mono Codec G.711 for security applications
• Stereo Codec AAC for broadcast applications
• HDMI video input / output
• Composite video input / output
• Audio input / output
• Instant recording to an optional USB drive (USB 2.0)
• Supports DDNS (Dynamic Domain Name Server)
• Built-in PoE (802af)
• RS-232 control built-in
• RS-422/485 control built-in
• 2 sensor inputs
• 2 alarm outputs
• Watchdog for system recovery
• Integrated video motion detection
• Transmission of video data through FTP server
• Wide range of video bit rate control (32kbps ~ 10Mbps)
• PSIA and ONVIF compliant

• VS-102-HDI 2.0 MP high resolution encoder/decoder with HDMI1
• Power supply1

• Network interfaceEthernet 10 / 100Base-T (RJ-45)
• Network protocolTCP/IP, UDP, Multicast, DHCP, SMTP, HTTP, SNMP, RTP, RTSP
• User interface system status4x LED
• Storage recording/backup1x USB 2.0 port
• Software VS Manager/VMS-16 NVRlive monitoring, recording, search and playback, backup
• Dimensions (WxDxH)5.28" x 4.92" x 1.38"
• Weight1.1 pounds
• Video
  • Standards: H.264 (main stream), H.264/MJPEG (secondary stream)
  • Bitrate: 32 ~ 10,240 Kbps
  • Resolution: 1080i60, 1080p30 and lower resolutions
  • Frame rate range: 1 ~ 30fps
  • Input 1: 1x HDMI type-A, HDMI RX
  • Input 2: 1x BNC - Composite (default)
  • Output 1: 1x HDMI type-A, HDMI TX
  • Output 2: 1x BNC - Composite (default)
  • Motion detection: sensitivity adjustment
• Audio
  • Standards: G.711, AAC
  • Sample rate: 8kHz (G.711); 32kHz (AAC)
  • Data rate: 64Kbps (G.711); 64Kbps, 128Kbps (AAC)
  • Input: 1x line-in (mini-stereo)
  • Output: 1x line-out (mini-stereo)
• Serial
  • Port 1: 1x RS-232 (terminal block)
  • Port 2: 1x RS-422/485 (terminal block)
  • Data rate: 2,400bps ~ 115,200bps
• Sensor / alarm
  • Sensor input: 2x NO Contact (terminal block)
  • Alarm output: 2x NO Contact (terminal block)
  • Beep: 1x Buzzer 88 dB Min
  • Reset button: 1x Factory Reset button