Wireless SLI for Shure, Sony, Lectrosonics and Line6. By using original DPA adapters, the d:facto II supercardioid mic head can be used with a variety of other transmitting products.
The SL1 adapter ensures perfect mechanic and electronic fitting to wireless systems from Shure, Sony, Lectrosonics and Line6.
With unsurpassed capsule perfection, a three-stage pop-protection grid, perfect shock mounting and an electronic design handling high voltage from the capsule, the d:facto II sounds much more dynamic and distinct than any other wireless, even with entry level systems.
DPA FA4018VSL1B Features
- Extraordinarily natural sound
- Perfectly uniform supercardioid directionality
- High separation
- Extreme SPL handling
- Low handling noise
- Sleek design
- Flexible adapter system fits most professional wireless systems
- FA4018VSL1B vocal microphone capsule1
- Wireless adapter1
- Grid1
- Directional Patternsupercardioid
- Principle of Operationpressure gradient
- Cartridge Typepre-polarized condenser
- Frequency Response20Hz - 20,000Hz
- Effective Frequency Range ±2 dB at 4.7"40Hz - 16,000Hz with 3 dB soft boost at 12,000Hz
- Sensitivity, Nominal, ±2 dB at 1kHz
- 5 mV/Pa; -46 dB re. 1 V/Pa
- 2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
- Equivalent Noise Level, A-weightedTyp. 19 dB(A) re. 20 µPa (max. 21 dB(A))
- Distortion, THD <1%136 dB SPL RMS, 139 dB SPL peak
- Dynamic Rangetyp. 120 dB
- Max. SPL, THD 10%160 dB SPL peak
- Rated Output Impedance100 Ω
- Min. Load Impedance1 kΩ
- Cable Drive Capability328 ft
- Output Balance Principleimpedance balancing with Active Drive
- CMRR> 50 dB at 1kHz
- Power Supply (for full performance)P48 (phantom power)
- Current Consumptionmax. 2.0 mA
- ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Max. Output Voltage, RMS8 V
- Polarity+V at pin 2 for positive sound pressure
- Temperature Range-40°F to 113°F (-40°C to 45°C)
- Relative Humidityup to 90%
