The RMG-200 is an extremely efficient standalone horn/driver system designed for long projection voice-range sound reinforcement, announcement and signaling applications. The 50° x 40° horn, driven by Community’s M200 midrange compression driver, delivers focused, high-output sound projection from 400 Hz to 8 kHz with effortless vocal clarity and extremely low distortion. The rugged fiberglass construction and inherently weather-resistant driver design ensure exceptional long-term durability and performance predictability. The RMG-200 is available from the factory with a 200W autoformer installed for 70V/100V applications. A weather-resistant, rotatable hot-dipped galvanized steel mounting bracket is included for installation convenience.
Community RMG-200A System Features
- 2-inch (51 mm) throat exit M200 driver
- Low distortion, high efficiency, high power output
- Non-metallic diaphragm
- Swivel yoke bracket included
- Highly resistant to harsh environments, IP65W rating per IEC 60529
- RMG-200A Voice Range Announcement System1
- Swivel yoke bracket 1
- Loudspeaker TypeVoice-range horn system
- Operating Range
- 400 Hz to 8 Khz
- 500 Hz to 4 khz (±3.5 dB)
- Max Input Ratings75W continuous, 120W program
- Recommended Power Amplifier100W to 140W
- Sensitivity (1W/1m)115 dB SPL (400 Hz to 4 kHz 1/3 octave bands)
- Maximum Output 134 dB SPL / 141 dB SPL (peak)
- Nominal Impedance11 Ohms
- Minimum Impedance10.8 Ohms @ 1.8 kHz
- Nominal –6dB Beamwidth
- 50°H (+14° / -9°, 2 kHz to 4 kHz)
- 40°V (+10° / -10°, 2 kHz to 4 kHz)
- Axial Q / Di35 / 15.4, 2 kHz to 4 kHz
- Crossover FrequencyNo internal crossover
- Recommended Signal Processing400 Hz high pass filter 24dB / Oct.
- DriversMF 1 x M200, Ferrofluid-cooled
- Driver ProtectionNone
- Input Connection16 gauge, 2 conductor, 12 foot (4 m) SJOW cable through gland nut
- ControlsNone
- EnclosureFiberglass
- Enclosure HardwareNone
- Mounting/Rigging Provisions(4) 1/4” holes at the corners of the horn mouth Grille: None
- Environmental PerformanceIEC529 IP66W rating with a minimum 5-degree downward aiming angle
- Required Accessories400 Hz high pass filter 24dB / Oct.
- Dimensions
- Height:9.75 inches (248 mm)
- Width (front): 17.63 inches (448 mm)
- Width (rear): 10.5 inches (267 mm)
- Depth: 25 inches (635 mm)
- Weight (with bracket): 21 lbs (9.5 kg)
- Shipping Weight: 27 lbs (12.2 kg)
- Notes
- 1. Sensitivity: Free field pink noise measurement at 40 ft (12.2 m) at 50% power; extrapolated to 1 meter and an input of 3.4 volts RMS.
- 2. Watts: All wattage figures are calculated using the rated nominal driver impedance.