The Bassbone OD allows you to connect two bass guitars and sculpt the tone of each one individually, as each input has its own level and EQ controls. The EQ settings have been specifically tailored for use with basses, and include a high pass filter to roll off excessive low end, along with a selectable center frequency for the Mid EQ boost/cut. Input A features a PZB booster designed for use with upright basses that employ a piezo transducer, while Input B includes a Drag Control impedance correction circuit that adjusts the load presented to magnetic pickups for a more natural tone. Following the input and EQ section, the Bassbone OD allows both instruments to share your effects pedals with an EFX Loop, which then feeds a powerful on-board overdrive.
Radial Bassbone OD Features
- Toggle between any two basses with ease
- Individual EQ controls for each input
- Headphone output for silent practice
- PZB booster and piezo input for upright bass
- Built-in Radial DI with balanced output for the PA
- Bassbone OD Bass Preamp & Overdrive1
- Three Year Warranty (transferable)1
- Audio circuit type Discrete class-A FET input with low noise ICs.
- Frequency response 20Hz ~ 18kHz
- Dynamic range 85dB
- Gain Unity gain device
- Clip Level +10dBu at XLR
- Total harmonic distortion 0.05% @ -15dBu
- Intermodulation Distortion 0.2% @ -20dBu
- Input Impedance CH-A:220K/10M CH-B Variable from 22K to 1.8M
- Output Impedance 300 Ohms at XLR
- Equivalent Input Noise -92dBu at XLR
- Noise Floor -100dB
- Maximum Input +7dBu
- Construction 14-gauge steel
- Size (LxWxD) 8x4.2x2" (203x107x48mm)
- Weight 2.55lb (1157 grams)
- Shipping size (LxWxD) 10.75x5x2.75" (273x127x70mm)
- Shipping weight 2.8lb (1270 grams)
- Power +15VDC/400mA adapter included
- Conditions For use in dry locations only between 5°C and 40°C
