The ART CX310 Stereo 2-Way/3-Way Crossover is a perfect addition to any sound reinforcement system. Designed for PA and fixed-installation applications, the CX310 employs 24dB/ octave state-variable, fourth-order, Linkwitz-Riley filters. These filters guarantee in-phase outputs at all frequencies. This ensures the proper acoustic summing of common signals from adjacent drivers in the crossover region. Housed in a rugged all-steel chassis, the model CX310 will provide years of reliable and continuous service.
The CX310 may be used as either a stereo 2-way crossover network, splitting the signal in each channel into two separate frequency ranges (Lo and Hi), or as a mono 3-way crossover network, splitting one signal into three separate frequency ranges (Lo, Mid and Hi).
ART CX310 Features
- Each channel features input level, high and low output level and crossover frequency rotary control
- Frequency x10 switch provided for varying the crossover frequency from the standard 80Hz-920Hz to 800Hz–9200Hz
- Front-panel output mute switches for each individual output to ease system setup
- Rear panel features balanced XLR and 1/4” TRS input and output connectors as well as a 2- way/ 3-way mode selector switch
- Power for the CX310 is internal
- Stereo Two-Way or Mono Three-way Configurations
- Fourth-Order Linkwitz-Riley Filters
- Active Balanced XLR and 1/4″ TRS Input and Output Connectors
- Individual Output Muting Switches
- x10 Frequency Range Adjusting Switch
- Clipping Indicators on all Outputs
- Designed for years of continuous, reliable performance
- Rugged all-steel Construction
- CX310 Stereo 2-Way/3-Way Crossover1
- Input Connections XLR, 1/4” TRS, balanced
- Output Connections XLR, 1/4” TRS, balanced
- Frequency Response 10Hz to 20kHz, +0/-1.5dB
- Crossover Frequency Range
- x1 80Hz to 920Hz
- x10 800Hz to 9.2kHz
- Crossover Filter Type Fourth-order Linkwitz-Riley, 24dB/octave
- Dynamic Range 118dB
- Signal to Noise Ratio >85dB
- Input Impedance 20k Ohms
- Output Impedance 150 Ohms
- Maximum Input Level +13dBu
- Maximum Output Level +21dBu
- Total Harmonic Distortion (THD) <0.05% (20Hz-20kHz)
- Maximum Gain +4dB
- Power Requirements
- 105-120V AC, 50-60hz, 3VA (USA)
- Export units configured for country of destination
- Dimensions (HxWxD) 1.75x19x6.5” (44x483x165mm)
- Weight7.1 lbs (3.2 kg)
