null Skip to main content
Audio-Technica ATW-1102 Digital Wireless Handheld System
Audio-Technica ATW-1102 Digital Wireless Handheld Microphone System

Audio-Technica ATW-1102 Digital Wireless Handheld Microphone System

(No reviews yet)
SoundPro Item: 13695
MPN: ATW-1102
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

Audio-Technica’s System 10 wireless system offers a stable audio solution for a variety of uses. Operating in the 2.4 GHz range keeps this system outside of TV and DTV interference. Operating range up to 100’ allows for mobile presentation. Up to eight channels can be used simultaneously. Three levels of diversity assurance – frequency, time, and space - support and protect the clear natural sound of this wireless system.

Receiver ATW-R1100 is the command center for the ATW-1102. Start quality audio production quickly with this receiver’s automatic frequency selection and pairing capabilities. Tabletop receiver has lightweight plastic housing, allowing multiple receivers to be stacked on top of it. Balanced XLR-type output and unbalanced ¼” TRS phone jack are on the back panel for connecting to other audio equipment. Connect to power source also from the rear panel. Receiver’s front panel features pairing switch, system ID select switch, and displays for system ID, pairing and AF peak.

Handheld transmitter ATW-T1002 pairs seamlessly with receiver from pairing switch in the battery compartment. Hypercardioid pattern brings a tight focus to sound in front of the mic, rejecting ambient noise. Adjustable trim control helps match the microphone to the audio source. Power/mute button is at the end of the microphone, while internal controls are protected by the ergonomic handle, which unscrews and slides off.

Audio-Technica ATW-1102 Features

  • Digital 24-bit/48 kHz wireless operation
  • Operates in 2.4 GHz range
  • Three levels of diversity assurance: frequency, time and space
  • Automatic frequency selection
  • Easy operation and set-up with instantaneous channel selection, quick pairing feature
  • Balanced XLR and unbalanced 1/4" output jacks with level control
  • Convenient pairing switch pairs transmitter to receiver
  • Handheld transmitter is battery powered with 2 AA batteries (not included)
  • Receiver ATW-R11001
  • Handheld transmitter ATW-T10021
  • Stand clamp1
  • Overall System
    • Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
    • Frequency Response: 20 Hz to 20 kHz (Depending on microphone type
    • Operating Range: 30 m (100') typical (Open range environment with no interfering signals
    • Total Harmonic Distortion: <0.05% typical
    • Operating Temperature Range (Battery performance may be reduced at very low temperatures): 0° C to +40° C (32° F to 104° F)
  • Handheld Transmitter
    • RF Power Output: 10 mW
    • Spurious Emissions: Following federal and national regulations
    • Battery Type: Two 1.5V AA (not included)
    • Battery Life (Depending on battery type and use pattern): >7 hours (alkaline)
    • Dimensions: 254.8 mm (10.03") long, 50 mm (1.97") diameter
    • Net Weight (without batteries): 280 grams (9.9 oz)
    • Accessories Included: AT8456a Quiet-Flex™ stand clamp
  • Receiver
    • Receiving System: Diversity (frequency/time/space)
    • Maximum Output Level
      • XLR, balanced: 0 dBV
      • 1/4" (6.3 mm), unbalanced: +6 dBV
    • Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
    • Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
    • Dimensions: 190 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
    • Weight: 290 grams (10.2 oz)
    • Accessories Included: Power supply

In The Box

Videos Hide Videos Show Videos

Audio-Technica ATW-1102 Digital Wireless Handheld System

Customer Reviews