Skip to main content
Audix M1280B Condenser Microphone
Audix M1280B Miniature Condenser Microphone

Audix M1280B Miniature Condenser Microphone

SoundPro Item: 28504
MPN: M1280B
MSRP: $529.00

Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The M1280B is a miniaturized condenser microphone with complete immunity from RF interference caused by cell phones and GSM devices, thanks to a fully integrated preamp and detachable cable. The M1280B condenser microphone is equipped with a cardioid capsule and is also available with hypercardioid, omnidirectional, or shotgun capsules. The M1280B has a very wide frequency response and may be used in a wide variety of stage, studio, and broadcast applications.

The M1280B miniaturized condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.

The M1280B Condenser Microphone is great for:

  • Overhead mic for choir, group vocal
  • Acoustic instruments
  • Ambient room miking
  • Symphonic area miking
  • Speech, Presentation, Podium
  • Cymbals, Percussion
  • Acoustic guitar

Audix M1280B Features

  • Lightweight, small profile
  • Miniaturized preamp circuitry
  • No external power adapter needed
  • 12 mm gold vapor diaphragm
  • Immune to RF interference
  • Extremely low noise, high SPL handling
  • Designed, assembled, manufactured & tested in the USA
  • M1280B Miniaturized Condenser Microphone1
  • CBLM25 25′ Cable With Mini-XLRf – XLRm Connectors1
  • MCMICRO Microphone Stand Adapter1
  • MCHANGER Hanging Clip1
  • WS1218 External Windscreen1
  • Three Year Warranty1
  • Transducer TypeCondenser
  • Polar PatternsCardioid, Hypercardioid, Omni, Supercardioid
  • Frequency Response40 Hz - 20 kHz
  • Output Impedance150 ohms
  • Sensitivity10 mV (C/HC), 12 mV (O), 18 mV (S) / Pa @ 1k
  • Equivalent Noise Level21 dB (A-weighted)
  • Signal to Noise Ratio73 dB
  • Maximum SPL=147 dB
  • Power Requirements18 – 52 V
  • Dynamic Range126 dB
  • Connector3-pin XLRm
  • PolarityPositive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Materials / FinishMachined Brass / Black Finish
  • Weight28 g / 1 oz
  • Length67 mm / 2.6 in

In The Box

Customer Reviews