The Bag End® PD10BX-N is a self-powered dual 10” Coaxial musical instrument speaker well matched to electric bass and acoustic instruments of all types. The red dust cap indicates a Coaxial driver that includes a 10” cone for lows and mids, a crossover network, and a 1” titanium diaphragm compression driver for extending the high frequency response. It has a damped spring loaded handle, sturdy rubber feet, and a 15 mm thick birch plywood cabinet covered in our unique Nebula finish making it a very portable, and extremely durable speaker enclosure. A Bag End® Minima 7™ power amplifier is internally mounted allowing and incorporates a high efficiency low power consumption green design with advanced digital switching to automatically switch and accept line voltage from 100 to 240 volts via a standard IEC inlet. The audio input incorporates an InGenius® balanced line receiver, providing very high common mode rejection, to eliminate noise often present in systems with less optimized grounding and wiring schemes. Its excellent sound and modest size make the PD10BX-N a great choice as a stand alone system for most gigs or as part of a larger multi way modular system. From top to bottom it includes the same legendary Bag End® quality and workmanship known for decades by the best musicians throughout the world.
Bag End PD10BX-N Features
- Double 10” Musical Instrument System
- Includes Internal Amplifier, Requires an External Preamp
- Designed For Bass Instruments, Chapman Stick and Guitar
- Nebula coated, Low Bass Enclosure with Coax AX-Hi Driver
- PD10BX-N Dual 10" Powered Speaker1
- System Type2-way rear vented 2.9 ft3
- Enclosure15 mm 11-ply solid core birch plywood
- FinishCoated Nebula finish
- Grille16 Gauge black powder coated perforated steel
- Low Frequency Components
- 1 - E-10XB 10” cone
- 1 – E-10B 10” cone ,
- 2” Voice coils, 40 oz Magnets
- High Frequency ComponentsTransducer, 1 – E-550 2” Titanium diaphragm, Compression driver
- Input ConnectorXLR 1/4” combo with XLR loop through
- Internal AmplificationMinima 7™
- Input Impedance48K ohms
- Input CAL Sensitivity+4 dBu
- Maximum Continuous Amplifier Power750 W
- High Pass FilterSwitchable: -6 dB @ 8 Hz; @ 50 Hz; @ 95 Hz
- Overload ProtectionInternal limiter
- LED Indicators
- Green - On
- Yellow - System limit
- Mains Voltage Requirements
- Auto sensing
- 100 / 120 / 240 V
- Mains Current Requirements
- 2.3 A @ 120 V
- 1.2 A @ 240 V
- Hardware
- 2 – Handles
- 8 – Feet
- Crossover TypePassive filter type @ 3.7 kHz
- Sensitivity100 dB SPL (2.83 V @ 1 m)
- Frequency Response42 Hz to 16 kHz ±6 dB
- PolarityA positive asymmetrical signal applied to pin 2 will result in a positive asymmetrical acoustical output
- Dimensions (H x W x D)18 x 22 x 18 inches (46 x 56 x 46 cm)
- Weight75 lbs (35 kg)
