Skip to main content
DPA 3532-SP Stereo Kit with Large Diaphragm Omnidirectional Microphones
DPA 3532-SP Large Diaphragm Omni Condenser Microphone Stereo Kit

DPA 3532-SP Large Diaphragm Omni Condenser Microphone Stereo Kit

SoundPro Item: 38586
MPN: 3532-SP
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The d:dicate 3532-SP is a complete state-of-the-art A-B Stereo Kit with two d:dicate 4041-SP Microphones. They are carefully matched within ±0.5 dB on both frequency response and sensitivity in the entire frequency bandwidth.

This A-B stereo kit is the ultimate choice for the demanding engineer and audio purist who emphasizes clarity, openness, precision, low self-noise and high sensitivity.

The kit is designed for a broad range of uses; for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more.

You get a bright and transparent sound quality with lots of headroom. With its soft boost, which is present on-axis, and gradually goes towards linearity off-axis, these omnidirectional microphones can be angled to use as a natural equalizer. These mics are a part of the d:dicate Recording Microphones Series.

DPA 3532-SP Stereo Kit Features

  • Handles high sound pressure levels with no distortion
  • Natural and transparent sound
  • Linear frequency response
  • Superior gain before feedback
  • 4041-SP microphones2
  • Windscreens2
  • Holders2
  • Stereo boom1
  • Transducer TypeCondenser
  • Polar PatternOmnidirectional
  • Frequency Response20 Hz - 20 kHz
  • Rated Output Impedance< 200 ohms
  • Sensitivity, Nominal ±2 dB at 250Hz70 mV/Pa; -23 dB re. 1 V/Pa
  • Equivalent Noise Level, A-Weightedmax. 8 dB(A) re. 20 µPa
  • Equivalent Noise Level, ITU-R BS.468-4max. 20 dB
  • Distortion, THD < 1%123 dB SPL RMS, 126 dB SPL peak
  • Dynamic Rangetyp. 118 dB
  • Max. SPL, THD 10%134 dB SPL peak
  • Cable Drive Capability100 m (328 ft)
  • Power Supply (for full performance)via external Power supply
  • Current Consumption2.2 mA
  • Connector3-Pin XLRM
  • Dimensions1" diameter x 6.7" length
  • Weight6.7 oz

In The Box

Customer Reviews